Red Lion Controls C48TS013 C48T DC (1PRSNKRLY)

Description

The C48TS013 has a single preseet. The C48T features a 7 segment, 2 line by 6 digit reflective LCD display. The main display line shows the timer value. The smaller secondary display line can be used to view the preset values or output time values. The unit has a solid-state output that operates in parallel with a relay output. The solid-state output is an NPN current sinking, open-collector transistor output. All relay output boards are field replaceable.

The C48 timer can be configured for 18 different operating modes to meet most timing application requirements. Twelve timing ranges are available from thousandths of a second to hours and minutes. Decimal Points are used to separate the time units (hours, minutes, seconds). Timing can be cumulative or can reset and start upon each power cycle. “On Delay” or “Off Delay”, “Single Shot”, “Repetitive auto cycling” modes are all supported.

The Timer can also be configured to Continue or Stop timing upon reaching Preset. The display can be programmed to stop at the preset value (Reset to Zero mode) or zero (Reset to Preset mode), or automatically reset to zero or preset and hold. Once stopped, the timer can be restarted by manually resetting it, or it can be programmed to restart when power is reapplied.

The C48 Timer has a Run/Stop Input, 3 programmable User Inputs, and a programmable front panel function key. The Run/Stop and User Inputs can be configured as sinking (active low) or sourcing (active high) inputs via a single plug jumper. The user inputs and the front panel function key can be configured to provide a variety of functions.

Four front panel push-buttons are used for programming the operating modes and data values, changing the viewed display, and performing user programmable functions, e. g. reset, etc. The C48T can be configured for one of two numeric data entry methods, digit entry or automatic scrolling. The digit entry method allows for the selection and incrementing of digits individually. The automatic scrolling method allows for the progressive change of one through all digit positions by pressing and holding the “up” or “down” button.

The unit is constructed of a lightweight, high impact plastic case with a textured front panel and a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. Multiple units can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the C48 Timers extremely reliable in industrial environments.

Specifications

• Single Preset
• 50 mm x 50 mm
• 2 Line, 6 Character Reflective LCD
• 12 Timer Range Modes
• NPN OC/Relay Output
• 11 to 36 VDC (24 VDC nominal) Input Power
• NEMA 4X/IP65

Accessories