![P1621110](https://static.mrosupply.com/cache/39/cf/39cfd69bad159ac93be468bfdc0cc082.jpg)
Image for Illustration purposes only. Actual product may vary
Red Lion Controls P1621110 P-CNTLDC01SA1RA2R
MODEL P1621110
Contact supplier for technical support on: 877-432-9908
$162.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Description
The P1621110 accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. The controller can provide an accurate output control signal (time proportional) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows these controllers to meet a wide variety of application requirements.
The controller operates in the PID Control Mode for both heating and cooling, with on-demand auto-tune, that establishes the tuning constants. The PID tuning constants may be fine-tuned through the front panel and then locked out from further modification. The controller employs a unique overshoot suppression feature, that allows the quickest response without excessive overshoot. Switching to Manual Mode provides the operator direct control of the output. The controller may also be programmed to operate in On/Off mode with adjustable hysteresis.
Alarm(s) can be configured independently for absolute high or low acting with balanced or unbalanced hysteresis. They can also be configured for deviation and band alarm. In these modes, the alarm trigger values track the setpoint value. Adjustable alarm trip delays can be used for delaying output response. The alarms can be programmed for Automatic or Latching operation. A selectable standby feature suppresses the alarm during power-up until the temperature stabilizes outside the alarm region.
The controller is constructed of a lightweight, high impact, black plastic textured case and bezel with a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. In applications that do not require protection to NEMA 4X, multiple controllers can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.
Specifications
- PID Control with Reduced Overshoot
- Accepts 0-10V and 0/4-20mA Signals
- 18 to 36 VDC or 24 VAC Input Power
- On Demand Auto-Tuning of PID Settings
- PC or Front Panel Programming
- Solid State Output
- Dual Alarms
Accessories
ENC11000 | ENC11 NEMA 4/IP65 1/16 DIN Enclosure |
---|---|
ENC11A00 | ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN Meter |
ENC11B00 | ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN Meter |
ENC30000 | ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1 |
BMK30000 | BMK3 Base Mount Kit for Legend Libra, T16, P16, T48, P48, C48 and PXU |
PMK3C000 | PMK3C C48, T48, P16, T16 and PXU Mounting Panel |
PMK60000 | PMK6 Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN) |
PMK70000 | PMK7 Panel Mount Adapter Kit (1/4 DIN to 1/16 DIN) |
PMKCC100 | PMKCC1 50 x 50 mm Panel Mount 3 Piece Kit for C48, T48 and PXU |
PMKCC200 | PMKCC2 72 x 72 mm Panel Mount 3 Piece Kit for C48, T48 and PXU |
PMKCC300 | PMKCC3 60 x 75 mm Panel Mount 2 Piece Kit for C48, T48 and PXU |
PNL3F000 | PNL3F Panel for 1/16 DIN Units |
PNL3G000 | PNL3G Panel for 1/16 DIN Units with Keylock |
TP16KIT1 | Programming Kit with Programming Cable Software & 115 VAC Power Supply |
TP16KIT2 | Programming Kit (Programming Cable & Software) without Power Supply |
SKU: 286716
Arived with the readout actully working
This one worked. Second one I ordered, one from another supplier. First one was dead. Battery is supposed to last for 5 years, it's an "always on" setup. Mine first one did last the 5 years. I use this on my milling machine powered by a VFD.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Koyo Bearing |
Model | JR12X16X12 |
Brand | MRC Bearing |
Model | 309RDS-BKE#7 |
Brand | Kipp |
Model | K0123.1063X25 |
Brand | Kipp |
Model | K0269.2A32X40 |
Brand | PTI |
Model | GILXSW10 |
Brand | Gates Rubber |
Model | A27 |
SKU: 286716
Arived with the readout actully working
This one worked. Second one I ordered, one from another supplier. First one was dead. Battery is supposed to last for 5 years, it's an "always on" setup. Mine first one did last the 5 years. I use this on my milling machine powered by a VFD.
Read more