![T4820219](https://static.mrosupply.com/cache/1f/e9/1fe954ae7ab95f7355cbb9a9024f92ae.jpg)
Image for Illustration purposes only. Actual product may vary
Red Lion Controls T4820219 DC TMP CN48501SA2SHCM
MODEL T4820219
Contact supplier for technical support on: 877-432-9908
$405.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Description
The T48 Controller accepts signals from a variety of temperature sensors (thermocouple or RTD elements), precisely displays the process temperature, and provides an accurate output control signal (time proportional or linear DC) to maintain the process at the desired temperature. The controllers comprehensive yet simple programming allows it to meet a wide variety of application requirements.
The controller operates in the PID control mode for both heating and cooling, with on-demand auto-tune, which will establish the tuning constants. The PID tuning constants may be fine-tuned by the operator at any time and then locked out from further modification. The controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. The unit can be transferred to operate in the manual mode, providing the operator with direct control of the output. The controller may also be programmed to operate in the ON/OFF control mode with adjustable hysteresis. A second setpoint is available on select models to allow quick selection of a different setpoint setting.
Dual 4-digit displays allow viewing of the process temperature and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. On many models the main control output and the alarm outputs are field replaceable.
Optional alarm(s) can be configured to activate according to a variety of actions (Absolute HI or LO, Deviation HI or LO, Band IN or OUT, and Heater Current Break) with adjustable hysteresis. A standby feature suppresses the alarm during power-up until the temperature stabilizes outside the alarm region. The second alarm can be configured as a secondary PID output (heat/cool applications).
Optional Heater Current Monitor provides a direct readout of process heater current. An alarm can be programmed to signal when the heater has failed. This provides early warning of system failure before product quality is affected.
The optional RS485 serial communication interface provides two-way communication between a T48 and other compatible equipment such as a printer, PLC, HMI, or a host computer. In multipoint applications (up to thirty-two), the address number of each T48 on the line can be programmed from 0 to 99. Data from the T48 can be interrogated or changed, and alarm output(s) may be reset by sending the proper command code via serial communications. PC software, SFCRM, allows for easy configuration of controller parameters. These settings can be saved to disk for later use or used for multi-controller down loading. On-line help is provided within the software.
The unit is constructed of a lightweight, high impact plastic case with a tinted front panel. The front panel meets NEMA 4X/IP65 specifications when properly installed. Multiple units can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.
Specifications
- 50 mm x 50 mm
- Full PID Control
- Temperature Inputs, RTDs and Thermocouples
- 18 to 36 VDC or 24 VAC Input Power
- Dual 4 Digit Display, 0. 4" (10 mm) Red and 0. 3" (7. 6 mm) Green
- Dual Logic/SSR Outputs
- Heater Current Input
- RS-485 Communication
Accessories
ENC11000 | ENC11 NEMA 4/IP65 1/16 DIN Enclosure |
---|---|
ENC11A00 | ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN Meter |
ENC11B00 | ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN Meter |
ENC30000 | ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1 |
BMK30000 | BMK3 Base Mount Kit for Legend Libra, T16, P16, T48, P48, C48 and PXU |
PMK3C000 | PMK3C C48, T48, P16, T16 and PXU Mounting Panel |
PMK60000 | PMK6 Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN) |
PMK70000 | PMK7 Panel Mount Adapter Kit (1/4 DIN to 1/16 DIN) |
PMKCC100 | PMKCC1 50 x 50 mm Panel Mount 3 Piece Kit for C48, T48 and PXU |
PMKCC200 | PMKCC2 72 x 72 mm Panel Mount 3 Piece Kit for C48, T48 and PXU |
PMKCC300 | PMKCC3 60 x 75 mm Panel Mount 2 Piece Kit for C48, T48 and PXU |
PNL3F000 | PNL3F Panel for 1/16 DIN Units |
PNL3G000 | PNL3G Panel for 1/16 DIN Units with Keylock |
RLY50000 | RLY5 Solid State Power Unit |
RLY70000 | RLY7 Three Phase DIN Rail Mount Solid State Relay |
RBD48100 | T48/P48 Output Board Main Control Relay |
RBD48111 | T48/P48/TLA Output Board, Main ControlDual Alarm Relay |
RBD48200 | T48/P48 Output Board, Main Control Logic Output |
RBD48211 | T48/P48 Output Board, Main Control LogicDual Alarm Relay |
RLY60000 | RLY6 25 A Single Phase DIN Rail Mount Solid State Relay |
RLY6A000 | RLY6A 40 A Single Phase DIN Rail Mount Solid State Relay |
SKU: 286716
Arived with the readout actully working
This one worked. Second one I ordered, one from another supplier. First one was dead. Battery is supposed to last for 5 years, it's an "always on" setup. Mine first one did last the 5 years. I use this on my milling machine powered by a VFD.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
SKU: 286716
Arived with the readout actully working
This one worked. Second one I ordered, one from another supplier. First one was dead. Battery is supposed to last for 5 years, it's an "always on" setup. Mine first one did last the 5 years. I use this on my milling machine powered by a VFD.
Read more