BUNTING LT003806 3/16 Bore 2 Bolt Flanged Mount Lube Align 2 Bolt Flanged Mount Lube Align

Bunting Bearings Llc Bunting&Reg; LT003806

UPC: 717905100468 | UNSPSC: 31171501 | GTIN:

Bearings > Flange Mount Bearing Units > Flange Mount Plain Sleeve Bearing Units

Bunting® Lube-Align® Flange Mount Bearing Unit, 0.1895 in Bore, 1-1/4 in Bolt Center-to-Center Length, 11/64 in Diameter Bolt Circle, 2-Bolt Flange Mounting, 1-5/8 in Overall Length/Diameter, 13/32 in Overall Depth, 3/4 in Overall Height, Sintered Bronze Bearing, 10 to 220 deg F

Features:

• A special casting technique which locks the bearing inside the aluminum housing, yet allows sufficient freedom of movement to enable the bearing to position itself to line up with greatly varying shaft directions
• This self-aligning feature saves by eliminating the costly hand labor normally required to align conventional bearings with shafts
• The powdered metal bronze bearings used in Lube-Align® products are actually 18% oil-impregnated
• In action, the oil literally rises to the surface to create a smooth, hydraulic cushion for the shaft which prolongs both bearings and shaft life
• Lube-Align® bearings save by eliminating the need for additional lubrication for the prolonged life of the bearing
• Lube-Align® bearings are made in more than 115 standard sizes ranging from ID 1/8 to 2 in for bearings and OD 3/4 to 3-1/2 in for the aluminum housings
• All of the bearings are equipped with exclusive 'fast mount' aluminum housings which save by keeping installation time and costs at an absolute minimum
• Devised and built on equipment which mass-produces Lube-Align® bearings
• Mass-production capacity combined with the increasing demand for Lube-Align® bearings keeps unit costs in quantities at a consistently economical level

Specs:

• Overall Length/Diameter: 1-5/8 in
• Flange Mounting Type: 2-Bolt
• Bolt Center-to-Center Length: 1-1/4 in
• Bolt Circle Diameter: 11/64 in
• Bearing Material: Sintered Bronze
• Temperature Rating: 10 to 220 deg F
• Overall Depth: 13/32 in
• Overall Height: 3/4 in
• Bore Diameter: 0.1895 in

Certifications/Standards:

ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B-5687D Military Specification | OSHA Standard 29 CFR 1910.1200 | SAE 841

Warranty:

90 Days