MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
$13.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
1.0000 in, 25.4 mm
Bore length
1.2813 in, 32.545 mm
Bushing size
H
Bushing type
Light Duty
I.D.
1 in
Installation torque
90 in/lb, 90.0 in/lb
Integral key
No
Keyway size
0.25 X 0.25
Material
Sintered steel
Number of bolts
2
Rated Torque
1000.0000 lbf, 4448.222 N
Shaft attachment
Finished bore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
- QD is a registered trademark of Emerson Electric
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/