Image for Illustration purposes only. Actual product may vary

Fenner Drives

6410119 Trantorque OE 1-3/16 in

MODEL 6410119

BRAND

Fenner Drives

SKU

1435902

WEIGHT

0.510 lb

UOM

each

Contact supplier for technical support on: 800 243 3374

$76.32 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $1

Select Quantity

GET A QUOTE

Orders over $500 qualify for a Free Gift

Typically Ships in: 1 day

Returnable: See conditions

Axial Movement

Approximately 0.075"

Bore Diameter

1-3/16 in

Compliancy

RoHS

Component Bore Diameter

1 3/4 in

Hub Contact Pressure

14865 psi

Hub Diameter

2.467 in

Hub Pressure (psi)

14865

Installation torque

177 ft lb

Internal/ External

Internal

Material

Steel

O.D.

1-3/4 in

Overall Length

1-1/8 in

Releasing/ Locking

Locking

Self-Centering

Yes

Series

Trantorque OE

Shaft diameter

1 3/16 in

Taper

Single

Thrust

8267 lbf

Torque Transmission

431 ft lb

Transmissible Thrust

8267 lb

Transmissible Torque

431 ft-lb

The Trantorque OE Series 1-3/16” Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 1-3/16” in diameter by means of a mounted mechanical interference fit and transmits up to 402 ft lbs of torque.

Best Suited For:

Applications where speed and simplicity of installation and repositioning are critical and a small OD/ID ratio is important.

Trantorque OE Series 1-3/16” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. While maintaining a minimal OD/ID ratio, The Trantorque OE Series Keyless Bushings also have exceptional concentricity and the ability to accommodate bending loads. They also have limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.Exceptional concentricity and ability to accommodate bending loads. Limited axial movement during installation. Minimal OD/ID ratio. All Trantorque units use a single hex nut for speed and simplicity of installation

Features of Fenner Drives Keyless Bushings:

Ability to transmit higher torques than keyed connections. True zero-backlash. Less equipment downtime. Ability to mount over existing keyways. Complete axial and radial adjustability. Simple installation, adjustment and removalAll Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.