Linn-Gear 1030C18 Flame Cut Sprocket H1

Type C Steel Sprockets for No. 1030 Mill Chain

3.075³ Chain Pitch 1 1/4³ Barrel Diameter 1 1/4³ Sprocket Face Width

Stock bores are nominal and must be re-bored even though bore desired is

same size as listed stock bore.

Listed maximum bore is with set screw at angle to keyway.

Stock sprockets above may also be used with the following chains or others having the same pitch, barrel diameter and width,

however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.

Chain Belt Champion No. 3, 1030DW, 1033, R1033, R1035, 1037, 1539

Jeffrey 3DD, SS39, IS1030, IS1031, IS1032, IS1037, IS3075

Link Belt AP13 Redhead, SS39, SS39+, SS40, SS40 Hyper, SS40+, LXS1031, LXS1032, LXS1032M, SS1033, LXS3075M

Moline MXS40, MXS1031, MXS3075

Union 119J, 119R, 119RX, US1031, US1032, 1190R, 1190R3, 1190RX, 1190SX, 1190SXX

Webster SS54+, S554

Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily

available and all can be furnished with hardened teeth. Please inquire for information and delivery.

Split Mill Chain Sprocket info (PDF)

Specifications