Baldor VEM3713T-5 15HP 3500RPM 3PH 60HZ 215TC 3752M TEFC F

Baldor ID5602-BO Hybrid AC Drive Digital Drive with Analog Interface

The ID5602-BO

Adjustable Frequency Drive is a variable speed control in a NEMA-4X /IP-65 washdown and watertight enclosure. It is designed to operate 208-230 Volt 3-phase AC induction motors through 6.7 Amps RMS. The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency and low noise.

On/Off AC Line Switch – P/N: 9482

Disconnects the AC line. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.

Forward-Stop-Reverse Switch – P/N: 9480

Provides motor reversing and stop functions. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.

Run-Stop-Jog Switch – P/N: 9340

Selects speed setting from either the Main Speed Potentiometer or the JOG Trimpot. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.

Signal Isolator – P/N: 9600

Provides isolation between a non-isolated signal source and the drive. Mounts on the drive’s PC board with four snap-ins.

Auto/Manual Switch – P/N: 9481

When used with the Signal Isolator, it selects remote process signal or the Main Speed Potentiometer. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity.

AC Line Filter – P/N: 9507

(Factory Installed) Provides Class A RFI (EMI) suppression.

Liquidtight Fittings - P/N: 9526

Provides a liquid-tight seal for wiring the drive. Kit includes necessary liquid-tight fittings

*Warning!

It is highly recommended that the Signal Isolator (Part No. 9600) be installed when using the drive with external control signals.