MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
VHECP2334T 20HP, 1765RPM, 3PH, 60HZ, 256HP, 0952M, TEFC
MODEL VHECP2334T
Contact supplier for technical support on: 323 724 6771
$4,976.64 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
TEFC
Frame
256HP
HP
20
Hz
60
Phase
3
RPM
1700 - 1800
Voltage
230/460
| Output | 20 |
|---|---|
| RPM | 1765 |
| Pallet Quantity | 0 |
| Specification Number | 09G604Y583 |
| Frame | 256HP |
| Weight | 337. 000 LB |
| Multiplier | SD |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | OZARK |
| Voltage | 230/460 |
| Poles | 04 |
| Class | STOCK |
| Type | 0952M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | X |
|---|---|
| Status | PRD/A |
| Change # | 790041 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 0952M |
| Elec. Spec | 09WGY583 |
| CD Diagram | CD0005 |
| Enclosure | TEFC |
| Manufacturing Plant | OZARK |
| Mech. Spec | 09G604 |
| Layout | 09LYG604 |
| Frame | 256HP |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | N |
| Rotation | R |
| Insulation | F |
| Eff. Date | 3/15/2013 |
| Leads | 9#12 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for VHECP2334T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 09G604Y583 | BALDOR/OZARK | 1/10/2005 | 52M 4P TEFC VER 256HP CHEM SERV SP#32-6 |
| Nameplate No. | NP1260E |
|---|---|
| CAT. NO. | VHECP2334T |
| SPEC. | 09G604Y583 |
| HP | 20 |
| VOLTS | 230/460 |
| AMP | 48/24 |
| RPM | 1765 |
| FRAME | 256HP |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | H |
| DES | B |
| CL | F |
| NEMA-NOM-EFF | 93 |
| PF | 84 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | 51 |
| DE | 6311 |
| ODE | 6208 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 59 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 9. 41 Amps |
| Break-Down Torque | 213 LB-FT |
| Line-line Res. @ 25°C. | 0. 426 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 85. 4 LB-FT |
| Temp. Rise @ Rated Load | 60°C |
| Locked-Rotor Torque | 121 LB-FT |
| Temp. Rise @ S. F. Load | 74°C |
| Starting Current | 175 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 46 | 69 | 80 | 84 | 86 | 87 | 85 |
| Efficiency | 89 | 92. 8 | 93. 1 | 93 | 92. 2 | 91. 1 | 92. 5 |
| Speed (RPM) | 1791 | 1783 | 1770 | 1766 | 1756 | 1745 | 1760 |
| Line Amperes | 10. 7 | 14 | 19. 1 | 23. 7 | 29. 1 | 35. 4 | 26. 94 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA123578 | SA 09G604Y599G1 | 1 EA | |
| RA114066 | RA 09G604Y599G1 | 1 EA | |
| S/P107-000-005 | SUPER-E PROC'S(254/6 FR. ) ZK PLANT - POL | 1 EA | |
| 09CB1002A13P | KOBX W/1. 50 NPT LEAD HL, 2. 38 MTG HL PATT | 1 EA | |
| 09GS1010 | GASKET, DWG, LEADWIRE SEPERATOR | 1 EA | |
| 10XN2520K12 | 1/4-20 X. 75 GRD 5 | 4 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA | |
| HA3400A33 | STUD- 3/8-16 X 4. 82 HEX WELKER | 4 EA | |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA | |
| 10XN2520K12 | 1/4-20 X. 75 GRD 5 | 1 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| HW4600B44SP | V-RING SLINGER 1. 500 X 2. 290 X 0. 280 | 1 EA | |
| HW5100A08 | W3118-035 WVY WSHR (WB) | 1 EA | |
| 10XN2520K28 | 1/4-20 X 1. 75' HX HD SCRWGRADE 5, ZINC P | 2 EA | |
| 10XN3118K56 | 5/16-18 X 3. 50' HEX HD, GRADE 5 | 4 EA | |
| 09EP1505A11P | PU ENDPLATE ENCL 213 BRG 309 254-256LP, | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| 10XN3816K24 | 3/8-16 X 1. 50 HEX HD CAP SCREW, GRADE 5 | 4 EA | |
| HW4600B40 | V-RING SLINGER 2. 000 X 2. 680 X 0. 280 | 1 EA | |
| 09FH1000A11P | FAN COVER, MACH P-BASE W/EPOXY PRIMER | 1 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 4 EA | |
| HW4600E45 | CR#20599 DBL LIP VITON SEAL 2. 063 I. D. | 1 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 4 EA | |
| XY3816A12 | 3/8-16 FINISHED NUT | 4 EA | |
| HA6387 | SPL EYE BRACKET 309-10 FRCR. STEEL P-BAS | 2 EA | |
| 10XN3816K20 | 3/8-16 X 1. 25 HEX HD CAP GRADE 5 | 4 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 4 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 4 EA | |
| XY3816A12 | 3/8-16 FINISHED NUT | 4 EA | |
| 09FH1500A01P | DRIP COVER, MACH W/EPOXY PRIMER | 1 EA | |
| 10XN2520K30 | STD. 25X20 THD HEX HD CAP SCREW, GRADE 5 | 4 EA | |
| HW1000A25 | 1/4 SAE FLAT WASHER (FS) | 4 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 4 EA | |
| 12CB1503A01P | KOLD MACH, W/LIP & EPOXY PRIMER | 1 EA | |
| 12GS1002 | GASKET, CONDUIT BOX LID, NEOP | 1 EA | |
| 10XN3118K16 | 5/16-18 X 1' GRADE #5, STL, ZINC PLATE | 2 EA | |
| HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 2 EA | |
| HW2501E18 | KEY, 1/4 SQ X 2. 000 | 1 EA | |
| MJ5001A01 | 46-665 RED SEALER | 0. 031 QT | |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA | |
| HW4500A05 | 1669B ALEM/UNIV860 GR FTG X | 1 EA | |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 08 LB | |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
| HW4500A03 | GREASE FITTING, . 125 NPT 1610(ALEMITE) 8 | 1 EA | |
| 51XB1214A20 | 12-14X1. 25 HXWSSLD SERTYB | 4 EA | |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 05 GA | |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA | |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA | |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA | |
| LB1182 | WARNING LABEL FOR MOTORS WITH EYENUTS | 1 EA | |
| PK6014 | STEEL STRAP FOR 309-312 BASELESS MOTORS | 3 EA | |
| 19XW3118A08 | . 31-18 X. 50 HEX WASHER HEAD TAPTITE II | 3 EA | |
| 09EP1100A28GP6 | ENDPLATE, MACH, PRIMED, W/RELIANCE GREEN | 1 EA | |
| MJ5001A14 | DYNAPRO SEAL, CP MOTORS VC#2508050 (603 | 0. 023 EA | |
| 37FN3002C02 | EXFN, PLASTIC, 6. 00 OD, 1. 500 ID | 1 EA | |
| HW2500A25 | WOODRUFF KEY USA #1008 #BLOW CARBON STEE | 4 EA | |
| LB1119 | WARNING LABEL | 1 EA | |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA | |
| LC0181 | CONNECTION LABEL | 1 EA | |
| NP1260E | SS CP SUPER-E UL CSA CC | 1 EA | |
| 40PA1014 | PACKAGING GROUP, 09 NO BASE | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 25904
Nobody does it better
Excellent professional service and great pricing. Best company I work with. People are supportive, knowledgeable and make my job easier. Great people and great company...MRO
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 701314
Exactly what i needed.
Exactly what was needed, delivered quickly as promised.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read more
#24782
Brand
Baldor
Model
VFDL3516TM
#23267
Brand
Baldor
Model
VHECP2334T
#23681
Brand
Baldor
Model
VHECP3663T
#23381
Brand
Baldor
Model
VHECP2394T
#24098
Brand
Baldor
Model
VFDL3612TM
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 25904
Nobody does it better
Excellent professional service and great pricing. Best company I work with. People are supportive, knowledgeable and make my job easier. Great people and great company...MRO
Read moreSKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 701314
Exactly what i needed.
Exactly what was needed, delivered quickly as promised.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/