MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
M1021T 1.5/.67HP, 1725/1140RPM, 3PH, 60HZ, 182T
MODEL M1021T
Contact supplier for technical support on: 323 724 6771
$1,313.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
OPEN
Frame
182T
HP
1.5
Hz
60
Phase
3
RPM
1140/1725
Voltage
208-230
| Output | 1 1/2-. 67 |
|---|---|
| RPM | 1725/1140 |
| Pallet Quantity | 20 |
| Specification Number | 36B01-450 |
| Frame | 182T |
| Weight | 55. 000 LB |
| Multiplier | L1 |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 208-230 |
| Poles | 04/06 |
| Class | STOCK |
| Type | 3623M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | U |
|---|---|
| Status | PRD/A |
| Change # | 502640 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3623M |
| Elec. Spec | 36WG0450 |
| CD Diagram | CD0013 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36B001 |
| Layout | 36LYB001 |
| Frame | 182T |
| Mounting | F1 |
| Poles | 04/06 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | B |
| Eff. Date | 6/22/2009 |
| Leads | 6#16 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for M1021T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36B01-450 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 23M 4/6P OPEN HOR 182T |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | M1021T |
| SPEC. | 36B01-450 |
| HP | 1 1/2-. 67 |
| VOLTS | 208-230 |
| AMP | 4. 4/2. 8 |
| RPM | 1725/1140 |
| FRAME | 182T |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | H |
| DES | - |
| CLASS | B |
| NEMA-NOM-EFF | |
| PF | |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | N/A |
| DE | 6206 |
| ODE | 6205 |
| ENCL | OPEN |
| SN | |
General Characteristics
| Full Load Torque | 4. 6 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 2 Amps |
| Break-Down Torque | 16 LB-FT |
| Line-line Res. @ 25°C. | 5. 05 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 9 LB-FT |
| Temp. Rise @ Rated Load | 28°C |
| Locked-Rotor Torque | 14 LB-FT |
| Temp. Rise @ S. F. Load | 39°C |
| Starting Current | 24. 5 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 48 | 70 | 81 | 87 | 90 | 92 | 0 |
| Efficiency | 66. 9 | 76. 8 | 79 | 78. 7 | 76. 9 | 73. 9 | 0 |
| Speed (RPM) | 1779 | 1760 | 1739 | 1715 | 1687 | 1653 | 0 |
| Line Amperes | 2. 2 | 2. 6 | 3. 3 | 4. 1 | 5. 1 | 6. 2 | 4. 7 |
General Characteristics
| Full Load Torque | 3 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 2. 2 Amps |
| Break-Down Torque | 10 LB-FT |
| Line-line Res. @ 25°C. | 8. 79 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 5. 5 LB-FT |
| Temp. Rise @ Rated Load | 26°C |
| Locked-Rotor Torque | 7 LB-FT |
| Temp. Rise @ S. F. Load | 34°C |
| Starting Current | 13 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 30 | 44 | 55 | 65 | 72 | 78 | 0 |
| Efficiency | 46. 1 | 61. 5 | 68. 4 | 71. 5 | 72. 7 | 72. 7 | 0 |
| Speed (RPM) | 1190 | 1181 | 1173 | 1163 | 1152 | 1140 | 0 |
| Line Amperes | 2. 2 | 2. 3 | 2. 5 | 2. 7 | 3 | 3. 3 | 2. 9 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA034221 | SA 36B01W65 | 1 EA | |
| RA030249 | RA 36B01W65 | 1 EA | |
| 36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA | |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA | |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA | |
| 36EP3200A01SP | FR ENDPLATE, MACH | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA | |
| 36EP3201A01 | PU ENDPLATE, MACH 182-4T | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA | |
| 36CB4516 | 36 LIPPED CB LID | 1 EA | |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA | |
| HW2501E16 | 3KEY, 1/4 SQ X 1. 750 | 1 EA | |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA | |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 022 GA | |
| HA3101A25 | THRUBOLT 1/4-20 X 11. 000 OHIO ROD | 4 EA | |
| LB1119 | WARNING LABEL | 1 EA | |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA | |
| LC0013 | CONNECTION LABEL | 1 EA | |
| NP1256L | ALUM UL CSA CC | 1 EA | |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 36-3403 | C FACE KIT | A8 |
| 36EP1405A09SP | D-FLANGE KIT | A8 |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/