Image for Illustration purposes only. Actual product may vary
M1006T 2/.5HP, 1725/850RPM, 3PH, 60HZ, 145T, 3528M, O
MODEL M1006T
Contact supplier for technical support on: 323 724 6771
$1,124.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
OPEN
Frame
145T
HP
2
Hz
60
Phase
3
RPM
1725/850
Voltage
230
Output | 2/. 5 |
---|---|
RPM | 1725/850 |
Pallet Quantity | 42 |
Specification Number | 35BB001X475G1 |
Frame | 145T |
Weight | 41. 000 LB |
Multiplier | L1 |
Enclosure | OPEN |
Item Type | MOTOR |
Manufacturing Plant | FT SMITH |
Voltage | 230 |
Poles | 04/08 |
Class | STOCK |
Type | 3528M |
Status | Active |
Commodity Code | 8501. 52. 4000 |
Origin | US |
Explosion Proof Class/Group | NONE |
Revision | B |
---|---|
Status | PRD/A |
Change # | 717656 |
Proprietary | No |
Type | AC |
Prod. Type | 3528M |
Elec. Spec | 35WGX475 |
CD Diagram | CD0032 |
Enclosure | OPEN |
Manufacturing Plant | FT SMITH |
Mech. Spec | 35BB001 |
Layout | 35LYBB001 |
Frame | 145T |
Mounting | F1 |
Poles | 04/08 |
Created Date | 12/22/2009 |
Base | RG |
Rotation | R |
Insulation | B |
Eff. Date | 10/27/2011 |
Leads | 6#18 |
Literature | |
Elec. Diagram | |
Replaced By |
Specification History for M1006T
Active | Specification Number | Plant | Date | Description |
---|---|---|---|---|
35BB001X475G1 | BALDOR/FT SMITH/REC WHSE #5 | 12/22/2009 | 28M 4/8P OPEN HOR 145T | |
35B001X475G1 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 28M 4/8P OPEN HOR 145T | |
35B001X475G1 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 28M 4/8P OPEN HOR 145T |
Nameplate No. | NP1256L |
---|---|
CAT. NO. | M1006T |
SPEC. | 35BB001X475G1 |
HP | 2/. 5 |
VOLTS | 230 |
AMP | 6. 1/2. 6 |
RPM | 1725/850 |
FRAME | 145T |
HZ | 60 |
PH | 3 |
SER. F. | 1. 15 |
CODE | K |
DES | B |
CLASS | B |
NEMA-NOM-EFF | |
PF | |
RATING | 40C AMB-CONT |
CC | |
USABLE AT 208V | |
DE | 6205 |
ODE | 6203 |
ENCL | OPEN |
SN | |
General Characteristics
Full Load Torque | 6 LB-FT |
---|---|
Start Configuration | DOL |
No-Load Current | 3. 6 Amps |
Break-Down Torque | 22 LB-FT |
Line-line Res. @ 25°C. | 2. 61 Ohms A Ph / 0 Ohms B Ph |
Pull-Up Torque | 15. 4 LB-FT |
Temp. Rise @ Rated Load | 51°C |
Locked-Rotor Torque | 16. 5 LB-FT |
Temp. Rise @ S. F. Load | |
Starting Current | 41. 8 Amps |
Load Characteristics
% of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
---|---|---|---|---|---|---|---|
Power Factor | 36 | 55 | 69 | 76 | 81 | 83 | 0 |
Efficiency | 69. 5 | 79. 4 | 81. 8 | 81. 3 | 80. 3 | 78. 8 | 0 |
Speed (RPM) | 1754 | 1770 | 1753 | 1734 | 1716 | 1699 | 0 |
Line Amperes | 3. 8 | 4. 4 | 5 | 6. 2 | 7. 2 | 8. 2 | 0 |
General Characteristics
Full Load Torque | 3 LB-FT |
---|---|
Start Configuration | DOL |
No-Load Current | 2. 1 Amps |
Break-Down Torque | 8. 9 LB-FT |
Line-line Res. @ 25°C. | 10. 7 Ohms A Ph / 0 Ohms B Ph |
Pull-Up Torque | 5. 6 LB-FT |
Temp. Rise @ Rated Load | 46°C |
Locked-Rotor Torque | 6. 1 LB-FT |
Temp. Rise @ S. F. Load | |
Starting Current | 9. 2 Amps |
Load Characteristics
% of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
---|---|---|---|---|---|---|---|
Power Factor | 26 | 37 | 46 | 55 | 60 | 65 | 0 |
Efficiency | 45. 9 | 59. 6 | 65. 1 | 67. 3 | 67 | 65. 6 | 0 |
Speed (RPM) | 889 | 881 | 873 | 861 | 850 | 836 | 0 |
Line Amperes | 2. 2 | 2. 3 | 2. 4 | 2. 6 | 2. 9 | 3. 2 | 0 |
Parts for current product
Product Number | Description | Quantity | |
---|---|---|---|
SA034205 | SA 36B01W39 | 1 EA | |
RA030233 | RA 36B01W39 | 1 EA | |
36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA | |
51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA | |
11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA | |
36EP3200A01SP | FR ENDPLATE, MACH | 1 EA | |
HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA | |
36EP3201A01 | PU ENDPLATE, MACH 182-4T | 1 EA | |
HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA | |
36CB4516 | 36 LIPPED CB LID | 1 EA | |
51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA | |
HW2501E16 | 3KEY, 1/4 SQ X 1. 750 | 1 EA | |
HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA | |
85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA | |
MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 022 GA | |
HA3101A23 | THRUBOLT 1/4-20 X 9. 625 DEMBY | 4 EA | |
LB1119 | WARNING LABEL | 1 EA | |
LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA | |
LC0032 | CONNECTION LABEL | 1 EA | |
NP1256L | ALUM UL CSA CC | 1 EA | |
36PA1000 | PACK GROUP W/LB5001 | 1 EA | |
LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
Product Number | Description | Multiplier |
---|---|---|
36-3403 | C FACE KIT | A8 |
36EP1405A09SP | D-FLANGE KIT | A8 |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/