Image for Illustration purposes only. Actual product may vary
EJPM2543T 50HP, 1775RPM, 3PH, 60HZ, 326JP, 4256M, OPSB, F
MODEL EJPM2543T
Contact supplier for technical support on: 323 724 6771
$6,439.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
OPSB
Frame
326JP
HP
50
Hz
60
Phase
3
RPM
1700 - 1800
Voltage
230/460
Output | 50 |
---|---|
RPM | 1775 |
Pallet Quantity | 0 |
Specification Number | 42E210W387 |
Frame | 326JP |
Weight | 500. 000 LB |
Multiplier | L1 |
Enclosure | OPSB |
Item Type | MOTOR |
Manufacturing Plant | COLUMBUS |
Voltage | 230/460 |
Poles | 04 |
Class | STOCK |
Type | 4256M |
Status | Active |
Commodity Code | 8501. 52. 8040 |
Origin | US |
Revision | G |
---|---|
Status | PRD/A |
Change # | 783708 |
Proprietary | No |
Type | AC |
Prod. Type | 4256M |
Elec. Spec | 42WGW387 |
CD Diagram | CD0180 |
Enclosure | OPSB |
Manufacturing Plant | COLUMBUS |
Mech. Spec | 42E210 |
Layout | 42LYE210 |
Frame | 326JP |
Mounting | F1 |
Poles | 04 |
Created Date | 7/8/2009 |
Base | RG |
Rotation | R |
Insulation | F |
Eff. Date | 2/1/2013 |
Leads | 9#8 |
Literature | |
Elec. Diagram | |
Replaced By |
Specification History for EJPM2543T
Active | Specification Number | Plant | Date | Description |
---|---|---|---|---|
42E210W387 | BALDOR/COLUMBUS | 1/6/2011 | 56M 4P OPSB HOR 326JP SE | |
42E210W387 | BALDOR/OZARK | 1/6/2011 | 56M 4P OPSB HOR 326JP SE | |
42F060W387G3 | BALDOR/OZARK | 9/10/2008 | 56M 4P OPSB HOR 326JP SE |
Nameplate No. | NP2138L |
---|---|
CAT. NO. | EJPM2543T |
P/N | |
ENCLOSURE | OPSB |
SPEC. | 42E210W387 |
CC | 010A |
FRAME | 326JP |
S/N | |
HP | 50 |
CLASS | F |
HZ | 60 |
RPM | 1775 |
PH | 3 |
DES | B |
VOLT | 230/460 |
KVA-CODE | G |
ODE BRG | 6311 |
DE BRG | 6312 |
AMP | 114/57 |
USABLE AT 208V | 121 |
RATING | 40C AMB-CONT |
GREASE | POLYREX EM |
NEMA-NOM-EFF | 94. 5 |
PF | 87 |
SER. F. | 1. 15 |
HTR-VOLTS | |
HTR-AMPS | |
MAX. SPACE HEATER TEMP. |
General Characteristics
Full Load Torque | 148 LB-FT |
---|---|
Start Configuration | DOL |
No-Load Current | 20. 2 Amps |
Break-Down Torque | 420 LB-FT |
Line-line Res. @ 25°C. | 0. 1208 Ohms A Ph / 0 Ohms B Ph |
Pull-Up Torque | 222 LB-FT |
Temp. Rise @ Rated Load | 36°C |
Locked-Rotor Torque | 280 LB-FT |
Temp. Rise @ S. F. Load | 47°C |
Starting Current | 378 Amps |
Load Characteristics
% of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
---|---|---|---|---|---|---|---|
Power Factor | 53 | 75 | 84 | 87 | 88 | 88 | 87 |
Efficiency | 91. 8 | 94. 5 | 94. 9 | 94. 7 | 94. 2 | 93. 4 | 94. 4 |
Speed (RPM) | 1793 | 1787 | 1781 | 1775 | 1769 | 1762 | 1771 |
Line Amperes | 24. 1 | 33 | 44. 3 | 57 | 70. 8 | 85. 4 | 65. 2 |
Parts for current product
Product Number | Description | Quantity | |
---|---|---|---|
SA183482 | SA 42E210W387 | 1 EA | |
RA171350 | RA 42E210W387 | 1 EA | |
S/P107-000-004 | SUPER-E(284 FR. & UP)-CL PLANT, POLYREX E | 1 EA | |
HA6360 | LIFTING LUG FOR 42 FRAME MOTORS. | 2 EA | |
HA6017A01 | CAST ADAPTOR | 1 EA | |
19XW3118A12 | . 31-18 X. 75 HEX WASHER HEAD TAPTITE II | 2 EA | |
HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 2 EA | |
10CB3001 | CONDUIT BOX CAST W/2. 500 LEAD HOLE | 1 EA | |
19XW3118A12 | . 31-18 X. 75 HEX WASHER HEAD TAPTITE II | 4 EA | |
HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 4 EA | |
WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA | |
51XF2520A08 | SCREW, HEX SER SLT HD, ZN 1/4-20 X. 50 L | 1 EA | |
42EP3200A01 | FR ENDPLATE, MACH 324-6T | 1 EA | |
HA1108A01 | RODENT SCREEN | 1 EA | |
51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 4 EA | |
HW5100A13 | W4627-047 WVY WSHER | 1 EA | |
42EP1300A17 | PU ENDPLATE, MACH W/RECESS FOR SLINGER, | 1 EA | |
HA1165A01 | RODENT SCREEN FOR 42 PU. C-FACE EP (INSI | 1 EA | |
51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 4 EA | |
10XN3118K40 | 5/16-18 X 2. 50' HEX HD, GRADE 5 | 4 EA | |
HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 4 EA | |
XY5013A12 | NUT, 1/2-13, HEX, STEEL, ZINCPLATED | 8 EA | |
10CB3500SP | CONDUIT BOX LID, CAST | 1 EA | |
51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 4 EA | |
HA2009A04 | 39-81 SLINGER (STERLING) | 1 EA | |
80XN1032A06 | 10-32 X 3/8 SET SC HEX SOCK | 1 EA | |
HW2501E18 | KEY, 1/4 SQ X 2. 000 | 1 EA | |
LB1115 | LABEL, LIFTING DEVICE | 1 EA | |
LB5040 | INSTRUCTION TAG, AC & DC | 1 EA | |
HW4500A03 | GREASE FITTING, . 125 NPT 1610(ALEMITE) 8 | 1 EA | |
HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 03 LB | |
HW4500A03 | GREASE FITTING, . 125 NPT 1610(ALEMITE) 8 | 1 EA | |
HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 08 GA | |
85XU0407A04 | #4-7 X 1/4 DRIVE PIN | 4 EA | |
42AD2001A01 | BAFFLE PLATE 42 OPEN, SLOTTED BAND MTRS | 1 EA | |
42AD2001A01 | BAFFLE PLATE 42 OPEN, SLOTTED BAND MTRS | 1 EA | |
HA3151A03 | THRUBOLT STUD 1/2-13 X 20. 5 | 4 EA | |
LB1119 | WARNING LABEL | 1 EA | |
LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA | |
LC0181 | CONNECTION LABEL | 1 EA | |
NP2138L | ALUM SUPER-E UL CSA-EEV PREM CC (300 | 1 EA | |
40PA1010 | PACKAGING GROUP BRAKE 10 | 1 EA | |
LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreSKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreSKU: 701306
Works great
Fast service product works as described I am nothing but happy at this point
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreBrand
WEG
Model
05018OP3E326JP
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreSKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreSKU: 701306
Works great
Fast service product works as described I am nothing but happy at this point
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/