MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
CENCP83581T-4 1HP, 1765RPM, 3PH, 60HZ, 143TC, 0524M, TENV, F1
MODEL CENCP83581T-4
Contact supplier for technical support on: 323 724 6771
$1,205.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Enclosure
TENV
Frame
143TC
HP
1
Hz
60
Phase
3
RPM
1700 - 1800
Voltage
460
| Output | 1 |
|---|---|
| RPM | 1765 |
| Pallet Quantity | 0 |
| Specification Number | 05F127W751G1 |
| Frame | 143TC |
| Weight | 64. 000 LB |
| Multiplier | SD |
| Enclosure | TENV |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 460 |
| Poles | 04 |
| Class | STOCK |
| Type | 0524M |
| Status | Active |
| Commodity Code | 8501. 51. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | H |
|---|---|
| Status | PRD/A |
| Change # | 783715 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 0524M |
| Elec. Spec | 05WGW751 |
| CD Diagram | CD0006 |
| Enclosure | TENV |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 05F127 |
| Layout | 05LYF127 |
| Frame | 143TC |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 11/20/2007 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/4/2013 |
| Leads | 3#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for CENCP83581T-4
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 05F127W751G1 | BALDOR/FT SMITH/REC WHSE #5 | 11/20/2007 | 24M 4P TENV HOR 143TC CHEM PROC SP#32-8 |
| Nameplate No. | NP2162E | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| CAT. NO. | CENCP83581T-4 | ||||||||
| SPEC. | 05F127W751G1 | ||||||||
| SPEC. | 05F127W751G1 | ||||||||
| MOTOR WEIGHT | 58 LBS | ||||||||
| HP | 1 | ||||||||
| T. CODE | T3 | ||||||||
| GREASE | POLYREX EM | ||||||||
| VOLTS | 460 | ||||||||
| MAX. KVAR | . 46 | ||||||||
| AMP | 1. 5 | ||||||||
| # OF ROTOR BARS | 28 | ||||||||
| # OF STATOR SLOTS | 36 | ||||||||
| RPM | 1765 | ||||||||
| BLANK | |||||||||
| FRAME | 143TC | HZ | 60 | PH | 3 | HTR-VOLTS | N/A | HTR-AMPS | N/A |
| SER. F. | 1. 15 | CODE | N | DES | B | CL | F | MAX. SPACE HEATER TEMP. | N/A |
| NEMA-NOM-EFF | 87. 5 | ||||||||
| PF | 70 | ||||||||
| G. MIN. EFF | 85. 5 | ||||||||
| CC | |||||||||
| RATING | 40C AMB-CONT | ||||||||
| DE | 6205 | ||||||||
| ODE | 6205 | ||||||||
| ENCL | TENV | ||||||||
| SN | |||||||||
General Characteristics
| Full Load Torque | 2. 99 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 1. 02 Amps |
| Break-Down Torque | 15. 8 LB-FT |
| Line-line Res. @ 25°C. | 12 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 9. 1 LB-FT |
| Temp. Rise @ Rated Load | 32°C |
| Locked-Rotor Torque | 11 LB-FT |
| Temp. Rise @ S. F. Load | 36°C |
| Starting Current | 15 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 28 | 48 | 60 | 70 | 76 | 81 | 74 |
| Efficiency | 74. 2 | 83. 6 | 86. 7 | 87. 8 | 87. 3 | 87. 1 | 87. 5 |
| Speed (RPM) | 1793 | 1785 | 1778 | 1770 | 1761 | 1753 | 1765 |
| Line Amperes | 1. 07 | 1. 18 | 1. 33 | 1. 53 | 1. 76 | 2 | 1. 67 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA165449 | SA 05F127W751G1 | 1 EA |
| RA153850 | RA 05F127W751G1 | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 06CB1001A01G | CONDUIT BOX, MACH GRAY | 1 EA |
| RM1016 | LEAD SEPARATOR GASKET - 305/306 C. P. MOTO | 1 EA |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X. 75 | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 10XN2520S06 | 1/4 20X3/8 HX HD CAP S. S. | 2 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA |
| 35EP1102B48G | FREP TENV 205 BRG W/GRSR, REL, GRD, . 25-20 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 35EP1329A32G | EP ENCL 205 BRG, GRSR, RLF, NPT DRAIN, INPRO | 1 EA |
| HW4601A22 | INPRO SEAL, 205 BRG, VBX | 1 EA |
| HW4600B36SP | V-RING SLINGER 1. 188 X 1. 690 X 0. 240 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| HA3100A28 | THRUBOLT 10-32 X 8. 187 | 4 EA |
| 06CB1503A01G | LIPPED CONDUIT BOX LID, MACH GRAY EPOXY | 1 EA |
| 06GS1009 | GASKET, KOBX LID, 1/8' THICK BLACK NEOPR | 1 EA |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| MJ5004A59 | ADHESIVE LOCTITE #401 SURFACE INSENSITIV | 0. 01 EA |
| MJ5001A01 | 46-665 RED SEALER | 0. 001 QT |
| MJ1000A73 | INPRO P-80 ASSEMBLY LUB. / 1 QT. CONTAINE | 0. 001 QT |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 4 EA |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| LT0019A00 | MOTOR NO-LOAD PERFORMANCE DATA SHEET | 1 EA |
| WD1000D21 | TRM, T&B #B71M, RING, 18-14, . 25, NON-INSL | 3 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 022 GA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1449 | DIV-2/NEC WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP2162E | SS IEEE841 DIV-2 UL CSA-C US EEV PREM | 1 EA |
| NP2113E | SS IEEE841 AUX DATA INFORMATION SURFACE | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/