![HBL4100PS2W](https://static.mrosupply.com/cache/47/59/4759a835bcf967ea4d534229c9178c54.jpg)
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL4100PS2W PS INS PLUG 3P4W 100A 600V S2
MODEL HBL4100PS2W
$722.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Amperage
100A
Voltage
250V DC/600V AC
Watertight Insulgrip Plug, 3P4W, 200A 2000V, Series 2
Specifications
Product Type | |
---|---|
Service Style | Standard |
Insulgrip Grounding Style | Style II |
Device | Plug |
Amperage | 100A |
Voltage | 250V DC/600V AC |
Poles and Wires | 3 Pole, 4 Wire |
Terminal Accommodations | #4 To #2 AWG copper wire only |
Cord clamp range | 1.100" To 1.650" |
Replacement Interior Number | IN4100MS2 |
Housing | Valox 357 |
Shroud | Aluminum |
Lock Ring | Epoxy Painted Aluminum |
Mounting Screws | Stainless Steel (300 Series) |
Contact Carrier | Thermoset Polyester |
Retainer | Thermoset Polyester |
Terminal Screws | Heat treated and Zinc Plated Steel |
Assembly Screws | Stainless Steel (300 series) |
Gaskets | Neoprene |
Cord Clamps | Rynite SST35 |
Grommet/Glands | Neoprene |
Gland Cap | Rynite SST35 |
Cord Clamp Screws | Stainless Steel (300 Series) |
Clamp Nut | Nickel Plated Brass |
Ground/Phase Sleeve | Brass |
Ground Standoff | Brass |
Ground Bracket | Nickel Plated Spring Bronze |
Certification | UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No.182.1, No.94 and No.159 (plugs only), UL Listed and CSA Certified Type 4X. |
Dielectric Withstand Voltage | Withstands 3, 000V AC Min. |
Max Working Voltage | 600V AC RMS (i. e., minimum creepage and clearance distance of 6.4 mm, per UL 1682). |
Current Interrupting | Certified for current interrupting at full rated current. |
Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current. |
Endurance | Up to 1, 000 connect and disconnect cycles at full rated current and voltage. |
Impact Resistance | Per CSA C22.2 N0.182.1 / UL1682 |
Cord Grip Retention | Per CSA C22.2 N0.182.1 / UL1682 |
Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
Terminal Identification | Terminals identified in accordance with UL1686 (1, 2, 3, Green). |
Product Identification | Identification and ratings are a permanent part of the device housing. |
Moisture Resistance | Type 3, 4, 4X per UL 50 and CSA C22.2, No.94. |
Flammability | UL 94V-0 and CSA C22.2 No.0.17 |
Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact. |
Hazardous Locations | Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No.459. |
Certifications | UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No.182.1, No.94 and No.159 (plugs only) UL Listed, CSA Certified Type 4X. |
Device Description | The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding. |
UPC Number | 78358501108 |
Weight in LBs | 4.35 |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreBrand
Hubbell Wiring
Model
HBL4100PS2W
Brand
Hubbell Wiring
Model
HBL4100RS2WR
Brand
Hubbell Wiring
Model
HBL4100CS2WR
Brand
Hubbell Wiring
Model
IN4100MS2
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Bunting Bearings |
Model | DPEP030506 |
Brand | Chicago-Latrobe |
Model | 45604 |
Brand | Baldor |
Model | 028768 |
Brand | Jason Industrial |
Model | 127.0M125 |
Brand | Jason Industrial |
Model | 52.0M157 |
Brand | Jason Industrial |
Model | 57.0M156 |
Brand | Jason Industrial |
Model | 52.0M250 |
Brand | Kipp |
Model | K0274.1A17X10 |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/