MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Saginaw Control SCE-EXD18 XEL LP Enclosure
MODEL SCE-EXD18
Contact supplier for technical support on: 989-799-6871
$713.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Depth
18.00"
Height
34.50"
Width
14.00"
Application
Designed for use with enclosures that require additional protection against Arc Flash. This enclosure can be used with an environmentally rated enclosure to isolate the main power supply. Increasing personal protection by preventing incidental contact or exposure to the high voltage arc flash and shock hazard, and potentially reducing the PPE level for the lower risk components of the main enclosure. The External Disconnect Enclosure can be incorporated into a new system. Aids in achieving compliance with NFPA 70E by concealing main power supply. For Use with Flange Mount Disconnect Enclosures Ref. SCE-84XM4018 or Similar.
Construction
- 0.075” carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Oil-resistant gasket.
- Collar studs provided for mounting panels.
- 31H X 12W Galvanized Subpanel installed.
- Concealed hinge.
- Black quarter turn latches.
- Latches are opened or closed with a screwdriver.
- Mounting hardware included.
- Mechanical interlock and hardware included.
- Mechanical defeater to bypass and open main enclosure requires Square 7 mm Key.
- Provision for 200 amp disconnect or less (Ref. D1 Cutout).
Finish
ANSI-61 gray powder coating inside and out.
Industry Standards - (IS2)
NEMA Type 4, 12 and Type 13UL Listed Type 4 and 12CSA Type 4 and 12IEC IEC 60529 IP IP 66
Notes
For Use with Flange Mount Disconnect Enclosures Ref. SCE-84XM4018 or Similar. Replace enclosure door handle with padlock-only version if interlock is used on main enclosure with 7mm bypass. Ref. SCE-PH5, SCE-PH7, SCE-SSPH5
Specifications
| Part Number | SCE-EXD18 |
|---|---|
| Description | XEL LP Enclosure |
| Height | 34.50" |
| Width | 14.00" |
| Depth | 18.00" |
| Catalog Page | 324 |
| Est. Ship Weight | 110.00 lbs |
SKU: 1359502
What i needed, when i needed it
Needed the panel and MRO came through! AS ALWAYS!
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 1359502
What i needed, when i needed it
Needed the panel and MRO came through! AS ALWAYS!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from Saginaw Control's Sales Terms and Conditions as stated on their website.
Returned Goods
SCE must receive written request for any product to be returned. Standard product in resalable condition will be assessed a 20% restocking charge. Return freight to be paid by purchaser. Upon receipt of product, SCE will inspect and determine salability. Any cost above restocking charge required to make product salable shall be deducted from the credit.
* No returns will be accepted of product that is requested to be returned after 6 months of its initial ship date.