Allen Bradley 440F-C4000P MatGuard Control Unit

Product Details

Rockwell Automation Safety Mat System MatGuard Control Unit

Complete your pressure sensitive MatGuard safety system and minimise risk injury to personnel in hazardous areas with the 440F-C4000P Matguard Control Unit. This device is designed to work within the MatGuard presence sensing system and monitor any number of mats which are connected together, forming a safeguarded zone up to a total area of 100m². The unit interfaces with the control circuitry of the machine and includes two safety relays for control redundancy.
The 440F Safety Mats offer whole body detection on the sensing surfaces. When the surface is clear the controller sends a signal to the control circuit of the machine. Conductive plates within the mat touch when the mat is stepped on and resistance in the circuit falls to zero. The controller then sends a shutdown signal to the machine, preventing risk of injury to operators within the dangerous area.

440F-C4000P MatGuard Controller

The 440F-C4000P controller has a selectable power supply of 230/110V AC (50-60Hz) and 24V AC/DC +10% -15%. The enclosure is made of polycarbonate and it has an operating temperature range of -10°C to +45°C. The housing has an environmental protection rating of IP65, which ensures that it is fully protected against ingress of dust particles and can withstand low-pressure water jets. The impulse withstand voltage is 2500V.
Housing dimensions:
D = 75mm
H = 180mm
W = 130mm

Features and Benefits:

Detects presence on the mat and open/short circuit
Cross-monitored output with redundancy
Auto/manual reset
Selectable input voltage
LED indicators
IP65 Polycarbonate Enclosure – resistant to water and dust-tight

Standards:

EN 1760-1, EN 60204-1, EN 954-1: CATEGORY 3, UL 508

What is MatGuard?

MatGuard is a pressure-sensitive mat safety system by Rockwell Automation. It is designed to monitor hazardous areas in industrial environments where machinery may be in motion, and detect when personnel enter the area. The machinery can then be automatically shut down to prevent injury to operators or risk of damage to machines from improper interference. Rockwell Automation offer a variety of presence sensing safety devices to ensure that you find the perfect solution for your application. Their products meet high global standards for quality, stability and reliability to provide world-class protection in the workplace.

What are Safety Relays?

Safety relays are monitoring devices which are used to continuously check for errors or faults in a machine safety system, and can implement safety commands when they detect these errors to bring the risk down to an acceptable level. By doing this, they defend against hazards which could cause injury to personnel and damage to machinery. Single function relays manage one specific function, while multi-function relays can oversee different activities. Safety relays can also be connected to each other. They are often used in industrial environments such as factories, as part of a safety system for dangerous machines. Typical applications include: safety mats, emergency stop push-buttons, light curtains, and magnetic switches.