Image for Illustration purposes only. Actual product may vary
Knipex 35 31 115 4 1/2" Electronics Pliers-Round Tips
MODEL 35 31 115
This vendor has a minimum order quantity of 8. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 847-398-8520
$31.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Brand Minimum Order Quantity: 8
Typically Ships in: 3 days
Returnable: See conditions
Handles
With non-slip plastic coating
Head
Mirror polished
Head width
11.0 mm
Jaw length
22.5 mm
Jaw thickness
6.5 mm
REACH compliant
Does not contain SVHC
RoHS compliant
Not applicable
Standard
DIN ISO 9655
Tips thickness
1.0 mm
Tips width
2.0 mm
- Precision pliers for fine assembly work, e g. in electronics and fine mechanics
- For gripping, holding and bending
- Sturdy, zero backlash box joint
- Smooth ground gripping surfaces
- Edges carefully deburred
- Low-friction double spring for gentle and even opening
- The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Round, pointed jaws
- Ball bearing chrome steel, oil hardened
Small and fine: electronics pliers for fine installation work
Short, smooth and good: 115 mm long for plenty of freedom of movement even where space is restricted
Space is usually tight when working on electronic equipment, printed circuit boards and precision constructions such as measuring equipment or delicate apparatus. A compact tool which can also be used to work well even in poorly accessible areas is therefore helpful.
With a length of just 115 mm and their slim, flat head, these 35 31 115 electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components.
The gripping surfaces, which are rounded at the front, are smooth ground to protect sensitive surfaces.
With box joint design and double spring – smooth operating and accurate
The smaller and more sensitive the component being worked on, the greater the challenges placed on pliers. The accurate, well-measured transmission of manual force to the component is vital. The mechanics of the Knipex 35 31 115 are very finely adjusted. The box joint is solid and smooth operating, because the inner handle is guided on both sides by the outer handle. This ensures precise running without any tilting effect. The low friction double spring supports the gentle opening of the pliers.
High Knipex quality standards and safety rust protection
The handles of the Knipex 35 31 115 electronics pliers are forged from special tool steel, oil-hardened, carefully deburred, mirror-polished and completed with opening spring and rivet to produce gripping pliers. Quality and safety are paramount – also regarding rust protection. There is no chrome-plating on the Knipex 35 31 115, so that no pieces of chrome can peel off and fall onto printed circuit boards. The mirror polish in conjunction with a fine oil film provides perfectly adequate corrosion protection for the pliers during workshop use. The pliers are always protected if the oil film is replaced occasionally.
Hohe Knipex-Qualitätsstandards und Sicherheitsrostschutz
Die Zangenschenkel der neuen Elektronik-Greifzange Knipex 35 31 115 werden aus Spezial-Werkzeugstahl geschmiedet, ölgehärtet, sorgfältig entgratet, spiegelpoliert und mit Öffnungsfeder sowie Niet zur Greifzange komplettiert. Der Rostschutz der Zange ist für Schaltkreise unbedenklich, weil es keine Verchromung gibt. Vor Korrosion ist die Zange dank Spiegelpolitur und feinem Ölfilm gut geschützt.
Mit den präzise gearbeiteten Spitzen lassen sich kleine Federn sicher halten, spannen und zuführen.
Zudem ist die Handkraft ist feinfühlig dosierbar – ideal bei empfindlichen mechanischen Bauteilen wie kleinen Zahnrädern. Mit der Knipex 35 31 115 werden Drahtenden an Bauteilen feinfühlig gebogen.
Gentle grip and firm hold
Manual force can be carefully measured – ideal for sensitive components such as small toothed wheels.
Slender gripping pliers for delicate installation work in precision engineering and electronics
Ideal for electronics and precision engineering
For gripping, holding and bending
Rounded tips
Stable thanks to box joint with zero backlash
Low friction double spring for gentle and steady opening
Smooth ground gripping surfaces
Pliers mirror-polished and with a fine oil film as rust protection
Handles coated with non-slip plastic
Length 115 mm
Net weight 58 g
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Brand | Irwin Tools |
Model | 1773620 |
Brand | Airmaster |
Model | 71581 |