DIXON 48P3SO15 3" HOLEDALL UNIRANGE SLIP ON

Dixon Valve & Coupling Dixon&Reg; 48P3SO15

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Hose Ends & Flanges > Swage End Flanges

Dixon® Fixed Flange, External Swage, Series: Holedall™, 3 in ID x 3-49/64 to 3-56/64 in OD Nominal, 1-3/16 in Thickness, Carbon Steel, 8-3/8 in, Domestic

Features:

• 150 lb ASA flange drilling
• The Holedall coupling provides long-lasting efficiency and safety
• The coupling system requires no bolts and results in a clean coupling with no protrusions
• Carbon steel stem, ferrule and flange
• Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system
• Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
• Do not use a wrench or vice on ferrule
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
• Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon
• Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Nominal Size: 3 in ID x 3-49/64 to 3-56/64 in OD
• Domestic/Import: Domestic
• Dimensions: 8-3/8 in
• Material: Carbon Steel
• Thickness: 1-3/16 in
• Type: External Swage
• Series: Holedall™

Packaging:

• Weight: 15.7 lb