DIXON FL40-4 2 1/2 HOLEDALL LONG TBLR FERRULES

Dixon Valve & Coupling Dixon&Reg; FL40-4

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Hose Ends & Flanges > Swage Ferrules

Dixon® External Swage Ferrule, Long, Series: Holedall™, 2-1/2 in ID x 3-25/64 to 3-32/64 in OD Nominal, Hose, 5 in Length, Carbon Steel, Plated, 3-7/8 in Dia, Domestic

Features:

• The coupling system requires no bolts and results in a clean coupling with no protrusions
• The holedall coupling provides long lasting efficiency and safety
• Style FL ferrules are extra long and are used with all long style external swage stems - TML, TGL and TPL styles
• The selection of ferrules is very important to achieve proper coupling-to-hose assembly
• Do not use a wrench or vice on ferrule
• The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon®s assembly procedures, using correct die and ferrule for that particular hose end OD
• Dixon®s die and ferrule recommendation guide is to be used to select correct dies and ferrules
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Nominal Size: 2-1/2 in ID x 3-25/64 to 3-32/64 in OD
• Domestic/Import: Domestic
• End Style: Hose
• Dimensions: 3-7/8 in Dia
• Material: Carbon Steel
• Finish: Plated
• Type: Long
• Length: 5 in
• Series: Holedall™

Packaging:

• Weight: 2.187 lb