DIXON FL64-Z 4" HOLEDALL LONG TBLR FERRULE

Dixon Valve & Coupling Dixon&Reg; FL64-Z

UPC: 089109849543 | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Pipe Fittings > Nylon Pipe Fittings

Dixon® External Swage Ferrule, Long, Series: Holedall™, Fitting/Connector Type: Ferrule, 4 in ID x 4-30/64 to 4-39/64 in OD Nominal, Hose, Carbon Steel, Domestic

Features:

• The coupling system requires no bolts and results in a clean coupling with no protrusions
• The holed all coupling provides long lasting efficiency and safety
• Style FL ferrules are extra long and are used with all long style external swage stems - TML, TGL and TPL styles
• The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
• Dixon® holed all stems and ferrules are specifically designed to be used together as a coupling system
• Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon® holed all products
• Do not use a wrench or vice on ferrule
• Holed all couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holed all fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Externally swaged holed all couplings, to perform satisfactorily, must be applied properly in accordance with Dixons assembly procedures, using correct die and ferrule for that particular hose end OD
• Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Fitting/Connector Type: Ferrule
• Nominal Size: 4 in ID x 4-30/64 to 4-39/64 in OD
• Domestic/Import: Domestic
• End Style: Hose
• Material: Carbon Steel
• Type: Long
• Series: Holedall™

Packaging:

• Weight: 3.56 lb