DIXON TG20 1 1/4 HOLEDALL TBLR MALES GROOVED

Dixon Valve & Coupling Dixon&Reg; TG20

UPC: | UNSPSC: 27121700 | GTIN:

Pipe, Tube & Hose Fittings > Hydraulic Fittings > Hydraulic Stems

Dixon® Grooved End Stem, Tubular, Series: Holedall™, 1-1/4 in Nominal, Hose, 4-3/8 in Length, 600 psi, Carbon Steel, Plated, Domestic

Features:

• The coupling system requires no bolts and results in a clean coupling with no protrusions
• The Holedall coupling provides long-lasting efficiency and safety
• For higher working pressure applications use long style stems and ferrules
• Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system
• Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products
• Do not use a wrench or vice on ferrule
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
• Dixon® die and ferrule recommendation guide is to be used to select correct dies and ferrules
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon
• Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Nominal Size: 1-1/4 in
• Domestic/Import: Domestic
• End Style: Hose
• Pressure Rating: 600 psi
• Material: Carbon Steel
• Finish: Plated
• Type: Tubular
• Length: 4-3/8 in
• Series: Holedall™

Packaging:

• Weight: 0.719 lb

Warranty:

Limited