Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic
T-7601V
Vacuum Ready Pistol Grip Needle Scaler 19 x 3mm 3000 Bpm
Taylor Pneumatic T-7601V Vacuum Ready Pistol Grip Needle Scaler 19 x 3mm 3000 BpmMODEL T-7601V
Contact supplier for technical support on: 800-805-8665
$346.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: Yes
Air Cons at Load
8.5
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Blows per Minute
3000
Length (in)
10
Max Air Pressure (psi)
90
Needle Capacity (mm)
19 x 3
Weight (lb)
5.7
Specifications
Both tools have the adjustable vacuum shroud brush attachment. The shroud is effective at trapping and removing coatings, corrosion and other debris dislodged by the needle scaler. These scalers work on almost any surface including irregular shapes such as tubing, rivet heads, steel window sills, weld seams, corner, edges, bearing mounts, concrete and many others.
Blows per min. | 3,000 |
---|---|
# of Needles | 19 |
Needle Diameter | 3mm |
Length | 10” |
Weight | 5.7 lbs. |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8” ID |
- Heat treated piston and barrel
- Rubber grip
- Needles adjust to contours
- Heavy Duty
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Brand | Modicon |
Model | 140EHC10500 |
Brand | Cleveland |
Model | C30603 |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more