![T-7761AH](https://static.mrosupply.com/cache/a8/45/a845e57d3c73811a3c350df54ba41837.png)
Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic
T-7761AH
Straight Handle Angle Head Screwdriver 1/4" Hex Drive 1500 RPM
Taylor Pneumatic T-7761AH Straight Handle Angle Head Screwdriver 1/4" Hex Drive 1500 RPMMODEL T-7761AH
Contact supplier for technical support on: 800-805-8665
$370.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: Yes
Air Cons at Load
12
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Air Load
12
Average Air Cons
4
Clutch Facing Type
Internally adjustable
Clutch Type
Internally adjustable
Hex Drive (in)
1/4
Length (in)
10
Max Air Pressure (psi)
90 PSI
RPM
1500
Torque Range (lb-ft)
30 - 70
Weight (lb)
1.8
Specifications
RPM | 1,500 |
---|---|
Hex Drive | 1/4" Female |
Max. Torque Soft Pull | 30 in. lbs. |
Max. Torque Hard Slam | 70 in. lbs. |
Length | 10" |
Weight | 1.8 lbs. |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
- Reversible
- Accurate Torque
- Internally adjustable clutch
- Rear Exhaust
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Allen Bradley |
Model | 20-750-CNETC |
Brand | Bunting Bearings |
Model | FFB061004 |
Brand | Bondhus |
Model | 15909 |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more