![T-8816](https://static.mrosupply.com/cache/ff/30/ff30b37852abd160215c2a48d3cda281.png)
Image for Illustration purposes only. Actual product may vary
Taylor Pneumatic
T-8816
7" Super Duty Angle Sander 5500 RPM
Taylor Pneumatic T-8816 7" Super Duty Angle Sander 5500 RPMMODEL T-8816
Contact supplier for technical support on: 800-805-8665
$421.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: Yes
Air Cons at Load
21
Air Inlet
1/4" NPT
Air Inlet NPT (in)
1/4
Average Air Cons
10
Free Speed (rpm)
5,500
Length (in)
12
Max Air Pressure (psi)
90
Spindle Size (in)
5/8-11
Weight (lb)
4.1
Specifications
This lightweight, rugged 1.0 Horsepower sander is excellent for shaping and contouring patches, body filler and for heavy rust removal. Comes complete with a rubber backup pad - our T-7470A.
Same great tool as the T-7716 but with a lower gear ratio. RPM is 2,500, the perfect polishing speed. Comes complete with a rubber backup pad (our T-7470A) and the T-7472 Wool Polishing Pad.
- All ball bearing construction
- Side handle for right or left handed operation
- Built-in regulator
- Hardened and ground spiral
- 1 HP motor
T-8816 | T-8816P | |
---|---|---|
RPM | 5,500 | 2,500 |
Spindle Size | 5/8"-11 | 5/8"-11 |
Length | 16" | 16" |
Weight | 4 5/8" | 4 5/8" |
Air Inlet | 1/4" NPT | 1/4" NPT |
Air Pressure | 90 PSI Max | 90 PSI Max |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Guardair |
Model | F5E072AQF |
Brand | Martin Sprocket |
Model | E60B16H |
Brand | Martin Sprocket |
Model | D160C45 |
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more