DIXON 3STF4-SS 3/8" SNAPTITE FF COUP. 1/2" NPTF 200571-3-4

Construction

• Machined components are manufactured using solid bar stock
• Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
• Steel componentry is plated using ROHS Compliant Trivalent Chrome.
• Steel coupler sleeves are hardened to resist deformation and maximize service life.
• Nitrile (Buna-N) seals are standard
• Incorporates PTFE anti-extrusion rings to protect seal components from dynamic impulse damage.

Available Options

• Contact Dixon for all available option adders
• Standard seal options include: FKM, EPDM, Mil-Nitrile and Fuel Nitrile
• Kalrez seal options include: 4079, 6375 and 7075
• Oxy-clean treatment is available

Compatibility & Interchange Data

• Interchangeable with Snap-Tite 71-Series

Note

• Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.

Safety notes

• WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.