N4S4-B Dix-Lock® N-Series Interchange Male End x Hose Barb Plug

Available Options

• Staked ferrule option available, contact Dixon
• 316 stainless steel available in some versions upon request, contact Dixon

Compatibility & Interchange Data

• Bowes Interchange Bayonet Style
• Interchangeable with Bowes 51000-Series, National Series 'B', MacDonald Quick-Action, Campbell Single-Lock

Construction

• Machined components are manufactured using solid bar stock.
• Stainless steel retaining ring and spring maximize corrosion resistance and extend service life.
• Coupling sleeve constructed of cast zinc steel

Safety Notes

• Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
• Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
• It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

• Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 Bar) Maximum Working and 8,200 PSI (865 Bar) Burst
• Conforms to MIL-C-3486 and A-A-50431A standards