Image for Illustration purposes only. Actual product may vary
SPX PE462S-E220 PUMP ELEC 220V 50HZ
MODEL PE462S-E220
Contact supplier for technical support on: 800-477-8326
$8,242.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
A (in)
19.63
A (mm)
499
Amp Draw (115 V at 10,000 psi)
25 Amps
Amp Draw (220 V at 700 bar, amps)
13
B (in)
6.81
B (mm)
173
C (in)
11.50
C (mm)
292
Control Switch
Remote Motor
D (in)
10.00
D (mm)
254
dBa at Idle and 10,000 psi
77
E (in)
18.50
E (mm)
470
F (in)
9.50
F (mm)
241
For Use with Cylinder Type
Single-Acting
G (in)
8.00
G (mm)
203
Maximum Pressure Output (bar)
700
Maximum Pressure Output (psi)
10,000
Motor
1,12 kW, 220V 50 Hz, Single Phase
Oil Delivery (in³/min at 0 psi)
500
Oil Delivery (in³/min at 10,000 psi)
46
Oil Delivery (in³/min at 100 psi)
450
Oil Delivery (in³/min at 5,000 psi)
51
Oil Delivery (l/min at 0 bar)
6.7
Oil Delivery (l/min at 350 bar)
0.7
Oil Delivery (l/min at 7 bar)
7.2
Oil Delivery (l/min at 700 bar)
0.6
Reservoir Usable (in³)
590
Reservoir Usable (l)
9.4
rpm at 50 Hz
2.875
rpm at 60 Hz
3,450
Valve Number
9570
Valve Type
3-Way
Valve Function
Advance
Weight with Oil (kg)
41.4
Weight with Oil (lb)
91
The Power Team 46 series is best suited for under the roof maintenance and production applications. Equipped with two-speed high-performance pump, for use with single- or double-acting cylinders at operating pressures to 10, 000 psi (700 bar) the 46 series pump is versitile. With a 1 1⁄2 hp (1.12 kW), 3, 450 (2, 875) rpm single-phase, 60 (50) Hz thermal protected induction motor that starts under full load. Noise level of 77-81 dBA. All equipped with a 10 foot (3, 1 m) remote control except PE462S which has a 25 foot (7, 6 m) remote control. 24 volt control circuit on all units with remote control. CSA rated for intermittent duty.
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.