Image for Illustration purposes only. Actual product may vary
JET 311441 EVS-1440B EVS Lathe with Taper Attachment
MODEL 311441
Contact supplier for technical support on: 8002746846
$18,899.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Compound Slide Travel (In.)
3-1/2
Cross Slide Travel (In.)
7
Gross Weight (Lbs)
1584
Length of Gap (In.)
9-1/2
Max Tool Size (In.)
3/4 x 3/4
Motor (HP)
3HP, 230/460V, 3PH
Net Weight (Lbs.)
1320
Number of Inch Threads
34
Number of Longitudinal and Cross Feed Rates
25
Number of Metric Threads
34
Overall Dimensions (L x W x H) (In.)
68.5 x 28.3 x 50
Range of Cross Feeds (IPR)
25
Range of Inch Threads (TPI)
2-56
Range of Longitudinal Feeds (IPR)
0.0016-0.0460
Range of Metric Threads
0.5-12
Range of Spindle Speeds (RPM)
40-2000
Spindle Bore (In.)
1-1/2
Spindle Mount
D1-4
Spindle Taper with Sleeve
MT-5
Steady Rest Capacity (In.)
0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP)
Swing Over Bed (In.)
14
Swing Over Cross Slide (In.)
9-1/16
Tailstock Spindle Travel (In.)
6-1/8
Taper in Tailstock Spindle
MT-3
Width of Bed (In.)
7.48
The EVS-1440B is engineered to maximize your shops output. The D1 4 Spindle is precision ground for accuracy and supported by class 7 tapered roller bearings capable of a run out maximum of .0004. The spindle also features an apron-mounted actuation control and jog button for easy gear engagement and spindle inching. The two-speed gearbox allows operators to easily work at low speeds from 40 to 365 RPM, and at high speeds from 220 to 2,000 RPM. Additionally, the tailstock may be offset for turning taper. Meehanite castings retain their tolerance and remain rigid over many years of machining.
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Brand | Link-Belt |
Model | 10442426 |
Brand | JET Tools |
Model | 892318 |
Brand | Zero-Max |
Model | B-11 |
Brand | Airmaster |
Model | 62002 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more