![101961](https://static.mrosupply.com/cache/68/6f/686ff969eb9ce2f82b674c2be6d399c7.jpg)
Image for Illustration purposes only. Actual product may vary
JET 101961 S90-1000-15 10 Ton 15' Lift
MODEL 101961
Contact supplier for technical support on: 8002746846
$1,977.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
22000
Lift (Ft.)
15
Load Capacity (Tons)
10
Load Chain Dimensions dia/mm)
10 x 30
Overload Protection
No
Weight (Lbs.)
252
JET Hand Chain Hoist, Contractor Grade, Series: S90, 10 ton, 15 ft Lifting Height, 96 lbf Pull to Lift, Dual Pawl Weston Brake
Dimensions
- Length: 22 in
- Height: 16.3 in
- Width: 19.2 in
- Length: 6884.35 cu-in
Features
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 80 black oxide coated load chain for durability
- Impact resistant covers that provide durability and protection
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Smaller body and lightweight design for low headroom applications and use in confined areas
- 357 ft hand chain overhaul to lift load 1ft
- 4 falls
- 30 in headroom
- 10 x 30 mm load chain
Standards: ANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Application: For light-duty industrial and low headroom applications
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | PEER Bearing |
Model | UCF207-35MM |
Brand | Gates Rubber |
Model | 2/3VX530 |
Brand | SKF Bearing |
Model | 6000-2Z |
Brand | FK Bearing |
Model | CMXL8T |
Brand | FK Bearing |
Model | NJML4 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more