![109100](https://static.mrosupply.com/cache/0d/28/0d287f24ce24c9a68911cb06b7eab7a5.jpg)
Image for Illustration purposes only. Actual product may vary
JET 109100 L100-1500WO-20 15 Ton 20' Lift and Overload Protection
MODEL 109100
Contact supplier for technical support on: 8002746846
$4,486.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
33000
Lift (Ft.)
20
Load Capacity (Tons)
15
Load Chain Dimensions dia/mm)
9 x 27
Weight (Lbs.)
425
JET Hand Chain Hoist, Series: L-100, 15 ton, 20 ft Lifting Height, 80 x 2 lbf Pull to Lift, Dual Pawl Weston Brake
Dimensions
- Length: 33 in
- Height: 7.87 in
- Width: 26.77 in
- Length: 7309.44 cu-in
Features
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Slip clutch design increases safety and overload protection by preventing lifting or pulling damaging loads
- Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- Load plates are heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Sealed ball bearing design increases efficiency and promotes smooth operation
- Patented fused brake design proven durability that increases safety with a lifetime replacement warranty
- Cast steel safety latches offer increased durability with heavy duty safety latches secured with Allen screws and lock nuts
- 396 x 2 ft hand chain overhaul to lift load 1ft
- 6 number of falls
- 34-1/3 in headroom
- 9 x 27 mm load chain
Standards: ANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Application: For Light duty industrial and low headroom applications
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Nachi Bearing |
Model | 6201ZZENR |
Brand | NTN Bearing |
Model | 23226BL1D1 |
Brand | FYH Bearing |
Model | UCFX09 27 |
Brand | PEER Bearing |
Model | HCP207-22 |
Brand | Link-Belt |
Model | 10414263 |
Brand | Timken |
Model | KAK1 3/16 PS |
Brand | SpillTech |
Model | ULT9322 |
Brand | SpillTech |
Model | WPR600 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more