![123200](https://static.mrosupply.com/cache/6f/61/6f61847eda0c9d65efb14048ba70603e.jpg)
Image for Illustration purposes only. Actual product may vary
JET 123200 1/2SS-3C-20 1/2 Ton 3Ph 20' Lift 230/460V Prewired 460V
MODEL 123200
Contact supplier for technical support on: 8002746846
$2,741.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
1000
Duty Cycle (%)
30
Duty Cycle Rating
H4
Lift (Ft.)
20
Lifting Speed (FPM)
31
Load Capacity (Tons)
1/2
Load Chain Dimensions dia/mm)
6.3 x 19
Max. Number of Starts (Per Hr.)
180
Max. On Time (Min. / Hr.)
18
Motor (HP)
1-1/3 HP, 460V, 3 Ph
Motor Phase
3
Overload Protection
Yes
Weight (Lbs.)
110
JET Electric Chain Hoist, 3-Phase Heavy Duty, Series: SSC, 0.5 ton, 20 ft Lifting Height, 31 fpm Lift Speed, 24 VAC Pushbutton Station Control, DC Electromagnetic Brake, 1-1/5 hp, 230/460 VAC, 20-3/16 in Headroom, 110 lb
Dimensions
- Length: 20.87 in
- Height: 15.35 in
- Width: 16.14 in
- Length: 5170.18 cu-in
Features
- Overload protection slip clutch design prevents the hoist from lifting damaging loads above its rated capacity
- Reverse phase relay a safety switch that protects the hoist from incorrect wiring of the power supply
- DC electro-magnetic brake an industry proven safety feature that secures the load even if power is interrupted to the hoist
- Limit switches - upper and lower limiting switches increase safety by preventing the load chain from over traveling
- Safety and durability, prewired 460 V
- Sealed gear train maintenance free gear train incorporates a sealed oil bath that eliminates upkeep
- Grade 80 black oxide coated load chain for durability
- Control pendant- 24 volt push button controller with cable strain relief system for durability and reliability in industrial and commercial settings
- 1 falls
- 30% duty cycle
- H4 duty rating
- Certification load tested to 125% of capacity with certificate
- Controls- NEMA 4X compliant push button control pendants
- Fully enclosed, all steel plate construction with a durable powder coat finish keeps out moisture, dust and debris lengthening the life of the hoist
- 6.3 x 19 mm load chain
Standards: ANSI/ASME B30.16|HST-1 Standards|OSHA Regulations
Application: Commercial and Industrial Applications
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Littelfuse |
Model | 15NLE3250E |
Brand | Dodge |
Model | 23AZ50H56WP |
Brand | Cle-Force |
Model | C68747 |
Brand | HubCity |
Model | 1002-02521 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more