![205115](https://static.mrosupply.com/cache/34/47/34471c47f705e99523eae77ebe29758b.jpg)
Image for Illustration purposes only. Actual product may vary
JET 205115 L100-50-15 1/2 Ton 15' Lift and Overload Protection
MODEL 205115
Contact supplier for technical support on: 8002746846
$390.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
1100
Force Required to Move Maximum Load (Lbs)
53
Lift (Ft.)
15
Load Capacity (Tons)
1/2
Load Chain Dimensions dia/mm)
5 x 15
Overload Protection
Yes
Weight (Lbs.)
29
JET Hand Chain Hoist, Series: L-100, 0.5 ton, 15 ft Lifting Height, 53 lbf Pull to Lift, Dual Pawl Weston Brake
Dimensions
- Length: 11.22 in
- Height: 7.35 in
- Width: 7.55 in
- Length: 622.8 cu-in
Features
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Slip clutch design increases safety and overload protection by preventing lifting or pulling damaging loads
- Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- Load plates are heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Sealed ball bearing design increases efficiency and promotes smooth operation
- Patented fused brake design proven durability that increases safety with a lifetime replacement warranty
- Cast steel safety latches offer increased durability with heavy duty safety latches secured with Allen screws and lock nuts
- 25 ft hand chain overhaul to lift load 1ft
- 1 number of fall
- 11-1/4 in headroom
- 5 x 15 mm load chain
Standards: ANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Application: For light-duty industrial and low headroom applications
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
![](https://documents.mrosupply.com/file_uploads/freegifts_1.png)
Brand | Orbit Industries |
Model | PG-3-F |
Brand | Reiff & Nestor |
Model | 64201 |
Brand | Nachi Bearing |
Model | 6307NRC3 |
Brand | PEER Bearing |
Model | UCPX08-24 |
Brand | SKF Bearing |
Model | 7206 BECBM |
Brand | Koyo Bearing |
Model | 6304 2RS |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more