JWWINCO 743.3-24-G1-B GN743.3-24-G1-B Oil Sight Glass Brass ESG Glass Without Reflector

Information

GN 743.3 Fluid level sight glasses offer the following features:
1. Genuine ESG glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings according to DIN 3865.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.

GN 743.3 Fluid level sight glasses can be used on pressurized oil tanks. Tests regarding maximum pressure are available upon request. Also, these oil level site glasses are suitable for applications with subpressure.
Maximum heat resistance: 180°C (356°F).
Sight glasses can be ordered with or without a reflector.

Note: When mounting fluid level sight glasses on walls of less than 4mm thickness, use nut GN 543.1.

Specification

• Brass, CuZn40Pb2
  

• ESG glass
  

• Heat resistant technopolymer plastic (Polysulfon)
  

• FPM rubber (Viton)
  

GN 543.1 fixing nuts