SEW Eurodrive Gearmotors
Looking for SEW Eurodrive Gearmotors?
MROSupply is an authorized distributor of SEW Eurodrive gear motors and supplies every corner of the United States.
SEW products are only available by quote request!
CALL 888-294-0381 A QUOTE TODAYHelical Gear Units/Helical Gearmotors
SEW Eurodrive offers a multitude of helical gearmotor ratios to meet your requirements and to optimize your space requirements. SEW Eurodrive offers a very diverse range of torque offerings and reduction ratios to fit your applications.
- Single-stage or multi-stage
- Foot-mounted or flange-mounted
- Flange-mounted with extended bearing hub
RX series (single-stage)
Designed for high output speeds, the single-stage SEW Eurodrive gear units RX57 to RX107 offer a compact solutions for your system needs.
| Gear unit reduction ratio [i] | 3.21 to 289.74 |
| Multi-stage gear unit reduction ratio [i] | 90 to 27001 |
| Output torque [Nm] ([in-lb]) | 31 to 18000 (270 to 159300) |
| Motor power range [kW] ([hp]) | 0.09 to 160 (0.12 to 215) |
R series (two-stage and three-stage)
SEW Eurodrive offers a great solution to those applications where weight is an issue. SEW’s multi-stage gear units (R07, R17, and R27) due to their die-cast aluminum are a lightweight solution to your gearing needs.
| Gear unit reduction ratio [i] | 3.21 to 289.74 |
| Multi-stage gear unit reduction ratio [i] | 90 to 27001 |
| Output torque [Nm] ([in-lb]) | 31 to 18000 (270 to 159300) |
| Motor power range [kW] ([hp]) | 0.09 to 160 (0.12 to 215) |
RM series
Designed especially for agitating applications, the SEW Eurodrive RM gearmotors with extended output bearing hub are a special type of helical gearmotor. They allow for high overhung and axial loads and bending moments.
| Gear unit reduction ratio [i] | 4.29 to 289.74 |
| Multi-stage gear unit reduction ratio [i] | 134 to 27001 |
| Output torque [Nm] ([in-lb]) | 270 to 18000 (2380 to 159300) |
| Motor power range [kW] ([hp]) | 0.12 to 160 (0.16 to 215) |
SEW Eurodrive Parallel Shaft Helical Gear Units/Parallel Shaft Helical Gearmotors
- High Overhund Load Capabilities
- High Torque Density
- Perfect for Low Speed Applicatiions
- Reduced Backlash Option Available
F series (two-stage and three-stage)
SEW Eurodrive’s parallel shaft helical gearmotors are extra slim and are the perfect solution when space is limited. The F Series Gearmotor is a great solution for conveying and material handling/processing applications. They are available in both Foot and Flange Mount, B5 or B14 Flange Mount, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.
| Gear unit reduction ratio [i] | 3.77 to 281.71 |
| Multi-stage gear unit reduction ratio [i] | 87 to 31434 |
| Output torque [Nm] ([in-lb]) | 87 to 18000 (770 to 159300) |
| Motor power range [kW] ([hp]) | 0.12 to 200 (0.16 to 268) |
SEW Eurodrive Helical Bevel Gear Units/Helical Bevel Gearmotors
- 96%+ Gear Efficiency
- Low Output Speed Capabilities
- Reduced Backlash Option
- High Torque Ratings
- Long Service Life
K series (three-stage)
SEW Eurodrives offers a highly efficient (96%+) solution with their Helical Bevel Gear Units. These units are energy efficient and have a long maintenance free service life. They can be used in a multitude of applications utilizing AC asynchronous motor and synchronous servomotors. They are available in both Foot Mounted and Flange Mounted variations, B5 and B14 Flange Mounts, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.
| Gear unit reduction ratio [i] | 3.98 to 197.37 |
| Multi-stage gear unit reduction ratio [i] | 94 to 32625 |
| Output torque [Nm] ([in-lb]) | 125 to 50000 (1110 to 442500) |
| Motor power range [kW] ([hp]) | 0.12 to 200 (0.16 to 268) |
SEW Eurodrive Helical Worm Gear Units/ Helical Worm Gearmotors
- Low Noise Gearing Solution
- High Overhung Load Capabilities
- Economical Operation
S series
SEW Eurodrive’s helical-worm gear units are helical/helical worm combinations and are more efficient than a typical helical worm gear units. This unit by SEW is a great low cost/low noise solution for simple applications. They are available in both Foot Mounted and Flange Mounted variations, B5 and B14 Flange Mounts, Solid or Hollow Shaft, and Hollow Shaft with Keyed Connection, Shrink Disc, Splined Hollow Shaft, or TorqLoc®.
| Gear unit reduction ratio [i] | 6.80 to 288.00 |
| Multi-stage gear unit reduction ratio [i] | 110 to 33818 |
| Output torque [Nm] ([in-lb]) | 43 to 4000 |
| Motor power range [kW] ([hp]) | 0.12 to 22 |
SEW Eurodrive Spiroplane Gearmotors
- Low Noise and Economical Operation
- Life Long Lubrication
- Light Weight Aluminum Housing
W series
Spiroplan® gearmotors are right-angle gearmotors with Siroplan® gearing. This is a very short design and compact gearmotor. The gearing is wear free and the unit offers life long lubrication. Spiroplan® gearmotors can be mounted installed in any mounting position as the oil fill is independent of the mounting position. This gearmotor is available in foot and flange mount as well as B5 and B14 flange mount.
| Gear unit reduction ratio [i] | 3.20 to 75.00 |
| Max. output torque | 12 to 1101 |
| Motor power range | 0.09 to 3.0 |
SEW Eurodrive Varigear / Varimotor Variable Speed Gearmotors
- High Starting Torque
- High Overhung Load Capabilities
- Many Gear Ratio Options Available
- Choice of Manual or Remote Speed Control
V series
The Varigear/Varimotor is SEW Eurodrive’s solution to variable speed drives with low output speeds and high output torque. They are available utilizing helical, parallel shaft helical, helical bevel and helical worm gear units.
| VARIGEAR® | Maximum motor power [kW] ([hp]) | Possible power flow | Maximum setting range for versions | ||
|
|||||
| VU / VZ 01 | 0.75 (1.0) | U + Z |
|
||
| VU / VZ 11 | 1.5 (2.0) | U + Z |
|
DR / DT/ DV AC Motors / AC Brake Motors
DR / DT / DV series AC motors and AC brake motors by SEW Eurodrive are a perfect match for SEW-EURODRIVE vertical gear units. Motors are offered in 2, 4, 6 or 8-pole or multi-speed. SEW-EURODRIVE brake motors have integrated DC safety disc brakes. SEW Eurodrive’s patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.
| Power Range | 0.09 to 200 (0.1 to 268) |
| No. of poles | 2 / 4 / 6 / 8 |
| Synchronous Speed | 750 / 1000 / 1200 / 1500 / 1800 / 3000 / 3600 |
| No. of poles, variable | 4/2 / 6/2 / 8/2 / 12/2 / 6/4 / 8/4 |
| Frequency | 40 to 60 (US Standard: 60) |
| Voltage | 220 to 690 |
| Enclosure | IP54, and on request: IP55, IP65, IP56 and IP66 |
ASEPTIC DAS motors
- .25 kW to 1.5 kW (0.33 hp to 2.0 hp)
- No fan - pure convection cooling
- Increased IP rating on motor enclosure
- High corrosion and surface protection
- Food grade gear oil optional
| Gear unit reduction ratio [i] | 4.29 to 289.74 |
| Multi-stage gear unit reduction ratio [i] | 134 to 27001 |
| Output torque [Nm] ([in-lb]) | 270 to 18000 (2380 to 159300) |
| Motor power range [kW] ([hp]) | 0.12 to 160 (0.16 to 215) |
Looking for something specific?
VIEW DATA & DOCUMENTS