GPI 503000-73 PRO20-115AD/QM150L8N AC ELECTRIC FUEL TRANSFER VANE PUMPS GPRO

Applications
Owners Manual
PRO20-115 SERIES OVERVIEW
The GPRO PRO20-115/QM is the perfect pump and meter combination that delivers flow rates up to 20 GPM (76 L/min) and provides precision fuel measurements for more accurate readings. The PRO20-115 professional-grade fuel transfer pump is the pump of choice for agricultural and construction applications with low viscosity petroleum fuels such as gasoline, diesel fuel, and kerosene. Available in a variety of configurations to meet your application's needs.

BENEFITS INCLUDE:
Extreme accuracy of QM meter
Center base inlet with check valve
Vacuum breaker ready
Extended duty cycle exceeds industry standards
Thermally protected motor
Field replaceable switch and vanes
N/A
N/A

PECIFICATIONS
The PRO20-115 and PRO20-230 fuel pumps are de signed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pumps are designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.

Performance
Pump Rate: PRO20-115: Up to 20 GPM (76 LPM)
PRO20-230: Up to 20 GPM (76 LPM) @ 60 Hz
Up to 17 GPM (64 LPM) @ 50 Hz
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
-20° F to +125° F (-29° C to +52° C)
Extreme Temperature Series pumps are capable of operation down to -40° F. Any pump operation below -20° F has not been evaluated by UL.
Bypass Pressure 22 PSI
Input: PRO20-115: 115 VAC, 60 Hz
PRO20-230: 220-240 VAC, 50-60 Hz
Conduit: ½ inch FNPT
Current Draw: PRO20-115: 4.9 amps at full load
PRO20-230: 2.3 amps on 60 Hz
2.5 amps on 50 Hz at full load on 230 VAC
Motor: PRO20-115: 1/3 HP, 1725 RPM
PRO20-230: 1/3 HP, 1725 RPM on 60 Hz
or .19 kw, 1425 RPM on 50 Hz