GPI 504000-73 PRO35-115AD/QM150L8N AC ELECTRIC FUEL TRANSFER VANE PUMPS GPRO

MODEL 504000-73

BRAND

GPI

SKU

6100914

WEIGHT

80.200 lb

UOM

each

$2,867.00 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $1

Select Quantity

GET A QUOTE

Free Gift with this product

Typically Ships in: 1 day

Returnable: Yes

PRO35 COMBO SERIES OVERVIEW
The GPRO PRO35-115/QM is the perfect pump and meter combination that delivers flow rates up to 35 GPM (132 L/min) and provides precision fuel measurements for more accurate readings. The PRO35-115 professional-grade fuel transfer pump is the pump of choice for your large stationary fuel tanks for your applications with low viscosity petroleum fuels such as gasoline, diesel fuel, and kerosene. Available in a variety of configurations to meet your application's needs.

BENEFITS INCLUDE:
N/A
High Pressure Pump
High Flow Rate
Extended duty cycle exceeds industry standards
Thermally protected motor
Field replaceable switch and vanes
Vacuum breaker ready
Center base inlet with check valve
https://drive.google.com/file/d/101NW1TURsXbgYkCFZ7zKJzMoR7Z72HhR/view?usp=sharing

SPECIFICATIONS
The PRO35 series fuel pump is designed to safely trans fer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pump is designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.

Performance
Pump Rate: Up to 35 GPM (132 LPM)
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature -20° F to +125° F (-29° C to +52° C)
XTS Operating Temperature Extreme Temperature Series pumps are capable of operation down to -40° F. Any pump operation below -20° F has not been evaluated by UL.

Bypass Pressure 25 PSI
Electrical Input: Factory set at 115 VAC, 60 Hz. Optional to set at 230 VAC, 60 Hz.
Conduit: ½ in. FNPT
Current Draw: 9.8 amps at full load (at 115 VAC, 60 Hz)
Motor: ¾ HP, 1725 RPM induction type provided with an internal auxiliary temperature-limiting device

Mechanical Connections
Bung: 2 in. MNPT
Inlet: 1 ¼ in. FNPT
Outlet: 1 in. FNPT

Accessories
Hose: 1 in. NPT x 1 in. x 18 ft. (5.5m) Buna-N electrically conductive
Nozzle: 1 in. NPT manual or 1 in. NPT auto matic diesel
Security: Nozzle can be padlocked