Image for Illustration purposes only. Actual product may vary
BOSTON 536.26.3232 HUCO-FLEX B 26 10MM--10MM HUCO-FLEX B COUPLING
MODEL 536.26.3232
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$49.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
O.D.
1.02 in
3-Convolution (standard) Short type for precisely aligned shafts. Stainless Steel Bellows Couplings, 3 Convolution with Clamp Style Fixing
Specifications
Family Name | High Performance Couplings |
---|---|
Coupling Type | Flex-B |
Size | 26 |
Outside Diameter | 1.02 (in) |
Service Factor | Acceleration |
Max. Bore 1 | 0.472 (in) |
Max. Bore 2 | 0.472 (in) |
L Min | 1.48 (in) |
Shaft Connection | Clamp |
Screw Size | M3 |
Screw Torque | 21.5 (in lb) |
Wrench 1 | 0.10 (in) |
Mass | 75.0 (lb) |
Moment of Inertia | 330 |
Max. Angular Compensation | 2.0 |
Max. Axial Compensation | 0.36 |
Max. Radial Compensation | 0.1 |
Torsional Flexural Stiffness | 755 |
Angular Flexural Stiffness | 1.3 |
Radial Flexural Stiffness | 238.0 |
Axial Flexural Stiffness | 5.7 |
Peak Torque | 28 (in lb) |
Max. Speed | 20,000.0 |
Max. Temp | 248.0 (°F) |
Min. Temp | -40.0 (°F) |
Insulating | FALSE |
L1 | 0.6 (in) |
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Brand | Gates Rubber |
Model | AT5-1050-100 |
Brand | Teco-Westinghouse |
Model | NP0102C |
Brand | Gorilla Mill |
Model | CEM3364B4TiALN |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.