MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Grove Gear
GR-BM842-30-R-180
30:1 Ratio, 1.25" Input Diameter, 1.875" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
MODEL GR8420127.00
Contact supplier for technical support on: 262-878-1221
$2,277.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-R
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Height (in)
17.50
Housing material
Cast iron
HP Range
5HP (< 7-1/2)
Input Bore (C Face)
1.125
Input Diameter (in)
1.25
Input Flange
182-4TC
Input HP
5.384
Input HP @ 1750 RPM
6.481
Input RPM
1170
Input Style
3-Piece Coupled
Keyway
1/4 x 1/8
Length (in)
40.00
Max OHL (Output Shaft)
3550
Max Thrust Load (Output Shaft)
2533
Model Code
BM842
Motor Frame Size
180TC
Motor HP Rating
5
Mounting Style
Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
5
Output
Right
Output Diameter (in)
1.875
Output HP
5.517
Output Key
1/2 X 3.06
Output RPM
58
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
5960
Output Torque (lb-in)
7300
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3550
Paint/Coating
Blue
Product Line
GR Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GR Series - Ironman Worm Gear Reducers
Series Code
GR
Series Style
GR-BM-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
Width (in)
37.00
Regal Beloit Grove Gear&Reg; GR8420127.00
UPC: 690310026700 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 30:1 Gear Ratio, 6.481 hp Input, 5.517 hp Output, 5 hp Motor, C-Face Coupled Input, Shaft Output, 1-1/8 in Dia Input, 1-7/8 in Dia x 4-1/2 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 5960 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.5 x 3.06 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 4-1/4 in
- Input Type: C-Face Coupled
- Output Size: 1-7/8 in Dia x 4-1/2 in L
- Input Size: 1-1/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 5960 in-lb Output
- Horsepower: 6.481 hp Input, 5.517 hp Output, 5 hp Motor
- Keyway Size: 1/4 x 1/8 in Input, 0.5 x 3.06 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GR Series
Packaging:
- Length: 40.0 in
- Width: 37.0 in
- Height: 17.5 in
- Weight: 154.0 lb
Warranty:
Limited
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
