MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Grove Gear
GRG-BM826-60-R-56
60:1 Ratio, 0.75" Input Diameter, 1.25" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
MODEL GRG8260058.00
Contact supplier for technical support on: 262-878-1221
$871.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 4 days
Returnable: See conditions
Assembly
BM-R
Center Distance
2.6 In.
Center distance (in)
2.63
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Height (in)
11.75
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.75
Input Flange
56C
Input HP
1.216
Input HP @ 1750 RPM
1.216
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 3/32
Length (in)
16.00
Max OHL (Output Shaft)
1625
Max Thrust Load (Output Shaft)
2091
Model Code
BM826
Motor Frame Size
56C
Motor HP Rating
1
Mounting Style
No Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
1
Output
Right
Output Diameter (in)
1.250
Output HP
0.835
Output Key
1/4 X 1.75
Output RPM
29
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
1805
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
1625
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
60 to 1
Ratio Range
60-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BM-R
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
56C
Width (in)
12.25
Regal Beloit Grove Gear&Reg; GRG8260058.00
UPC: 690310041239 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 60:1 Gear Ratio, 1.216 hp Input, 0.835 hp Output, 1 hp Motor, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1.25 in Dia x 2.73 in L Output, 29 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1805 in-lb Output, 2.63 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 29 rpm
- Centre Distance: 2.63 in
- Input Type: C-Face Coupled
- Output Size: 1.25 in Dia x 2.73 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1805 in-lb Output
- Horsepower: 1.216 hp Input, 0.835 hp Output, 1 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 60:1
- Output Type: Shaft
- Mounting Type: No Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
- Length: 16.0 in
- Width: 12.25 in
- Height: 11.75 in
- Weight: 57.0 lb
Warranty:
Limited
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more