NH-H821-40-H1-23

Regal Beloit Grove Gear&Reg; NH8210508.23

UPC: 690310063026 | UNSPSC: 26111537 | GTIN:

Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives

Grove Gear® IRONMAN® Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 40:1 Gear Ratio, 0.916 hp Input, 0.674 hp Output, Shaft Input, Hollow Bore Output, 0.625 in Dia x 1.76 in L Input, 1.438 in Dia Output, 43 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 971 in-lb Output, 2.06 in Centre Distance, 0.1875 x 1.38 in Input, 3/8 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron, 4.65 in W x 8 in H

Features:

• Rugged cast iron housing, covers and flanges provide superior strength and rigidity
• Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
• Large oil capacity provides positive splash lubrication and superior cooling capability
• FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
• O-rings on all bearing covers, eliminating gaskets, sealants and leaks
• Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
• Tapered roller bearings on output shaft for high overhung and thrust load capacities
• The unique quill seal guard protects the input seal from damage during motor installation
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
• Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
• Designed with industry leading premium features as standard
• Compact housing design to fit where other reducer brands cannot

Specs:

• Input Maximum Speed: 1750 rpm
• Output Maximum Speed: 43 rpm
• Centre Distance: 2.06 in
• Input Type: Shaft
• Output Size: 1.438 in Dia
• Input Size: 0.625 in Dia x 1.76 in L
• Lubrication Type: PAG Synthetic Oil
• Torque Rating: 971 in-lb Output
• Horsepower: 0.916 hp Input, 0.674 hp Output
• Keyway Size: 0.1875 x 1.38 in Input, 3/8 x 3 in Output
• Gear Ratio: 40:1
• Output Type: Hollow Bore
• Mounting Type: Shaft
• Dimensions: 4.65 in W x 8 in H
• Material: Cast Iron
• Type: Narrow Housing Right Angle Single Reduction
• Series: NH Series

Packaging:

• Weight: 22.0 lb

Warranty:

Limited