MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
26AZ05H18 Cast Iron Worm Gearbox
- Ratio: 5:1
- Center Distance: 2.6"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.4375"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 7.37
- Output Horse Power: 6.93
MODEL 26AZ05H18
Contact supplier for technical support on: 864-284-5700
$2,776.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Finish
Silver-gray epoxy
Gearbox component type
Gearbox
Horsepower rating input
7.3700 hp, 5.496 kW
Horsepower rating output
6.9300 hp, 5.168 kW
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
7.37
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
5
Output
Hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
6.93
Output shaft
Hollow
Output shaft center to input motor mounting face distance
9.5600 in, 242.824 mm
Output style
Hollow
Overhung load
1330 lbf, 5916.135 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
1247 in/lb, 1247.0 in/lb
Ratio
5 to 1
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
8.7900 hp, 6.555 kW
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/