MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
26S20H Cast Iron Worm Gearbox
- Ratio: 20:1
- Center Distance: 2.6"
- Input: 0.875" Input Shaft
- Output Bore/Shaft Diameter: 1.4375"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.71
- Output Horse Power: 2.32
MODEL 26S20H
Contact supplier for technical support on: 864-284-5700
$1,406.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
2.7100 hp, 2.021 kW
Horsepower rating output
2.3200 hp, 1.73 kW
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
2.71
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
20
Output
Hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
2.32
Output shaft
Hollow
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1673 in/lb, 1673.0 in/lb
Ratio
20 to 1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft length input
1.1700 in, 29.718 mm
Suitable for washdown
No
Thermal horsepower rating
3.7100 hp, 2.767 kW
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
| Brand | Enerpac |
| Model | STRS-52 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/