MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
47S40HWP Cast Iron Worm Gearbox
- Ratio: 40:1
- Center Distance: 4.7"
- Input: 1.125" Input Shaft
- Output Bore/Shaft Diameter: 2.9375"
- Output: Hollow Bore
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 6.21
- Output Horse Power: 4.61
MODEL 47S40HWP
Contact supplier for technical support on: 864-284-5700
$5,852.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable:No
Base to output center height
5.3100 in, 134.874 mm
Bore dia output
2.9380 in, 74.625 mm
Bore length
11.8800 in, 301.752 mm
Case size
47
Center distance (in)
4.7 in, Center distance (in):4.7500 in, 120.65 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
6.2100 hp, 4.631 kW
Horsepower rating output
4.6100 hp, 3.438 kW
Housing material
Cast iron
Input
1.125 in Input Shaft
Input HP
6.21
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
11.0000 in, 279.4 mm
Mounting bolt pattern width
5.8100 in, 147.574 mm
Nominal ratio
40
Output
Hollow bore
Output bore/shaft diameter
2.9375 in
Output horse power
4.61
Output style
Hollow
Overhung load
5600 lbf, 24910.041 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
6644 in/lb, 6644.0 in/lb
Ratio
40 to 1
Seal type
Single-lip contact
Shaft dia input
1.1250 in
Shaft length input
1.8100 in, 45.974 mm
Suitable for washdown
No
Thermal horsepower rating
5.6600 hp, 4.221 kW
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/