MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates CC390 CC Section Hi-Power II Double-V Belt
- Top Width: 7/8"
- Depth: 23/32"
- Outer Length: 392"
- Inner Length: 390"
- Material ID: 90540390
Gates Hi-Power Double-V belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt. Use this Gates solution for all industrial serpentine applications that require rotation reversal on some driven shafts. It uses flex-bonded tensile cords, which are highly resistant to flexing forces, and a protective Flex-Weave cover. It is the ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.
- Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and"creased belt life.
- Flex-Bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
MODEL CC390
Contact supplier for technical support on: 303-744-5800
$376.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Cogged
No
Depth
11/16 in
Depth (per rib)
11/16 in
Number ribs
1
outside length
392.2 in
Section
CC
Top width
7/8 in
Top width (per rib)
7/8 in
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
- Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. Fully wrapped construction, eliminates debris and dust concerns found in competitive double notch belts.
- Flex-Bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Flex-Weave oil and heat resistant cover protects the belt core from the toughest environments.
- Ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.
- Field tests prove Gates belts run 3-6 months and more compared to similar competitor belts that last only 1-3 weeks. All sizes meet Gates V80 system matching tolerances.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
THIS IS HI-POWER II, ON THE DOUBLE
The Gates Hi-Power II Dubl-V Belts are engineered with all the characteristics of Gates Hi-Power Belts, including the composite, multi-purpose construction and resistance in tough operating environments, with a two-belt Dubl-V construction for added stability and durability on your serpentine drives with one or more reverse bends.
Features and Benefits
- The Flex-Weave cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat.
- Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
- Match system: All sizes meet Gates UNISET tolerances, they can be installed without matching.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
- Dubl-V belts are available in AA, BB, CC and DD cross sections.
- Hi-Power Dubl-V DD not included in UNISET tolerances.
- Temperature Range: -30°C to +60°C (-22°F to +140°F).
- Lower transmission from both sides of the belt.
- Suitable for dirty/dusty environments.
A FORCE TO BE FLEXED WITH.
The Flex-bonded cords, supported by our patented, highly protective Flex-Weave cover, work together to create a strong, durable double-v profile belt with an extreme resistance to damaging flexing forces.
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 5917269
Blower belt
Like MRO...quick ship/good price but my F2 supercharger makes short work of these belts.
Read more
#676607
Brand
Bando
Model
CC390
#2017696
Brand
Carlisle PT
Model
CC390
#832425
Brand
TB Woods
Model
CC390
#351790
Brand
TB Woods
Model
CCP390
#1989786
Brand
Jason Industrial
Model
CC390
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreSKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 5917269
Blower belt
Like MRO...quick ship/good price but my F2 supercharger makes short work of these belts.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.