MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 10/3VX670 Super HC Molded Notch PowerBand Belt
- Cross Section: 3VX
- Strands: 10
- Sectional Top Width: 3/8"
- Total Top Width: 3 3/4"
- Depth: 21/64"
- Outside Circumference: 67.00"
- Material ID: 938810067
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 10/3VX670
Contact supplier for technical support on: 303-744-5800
$274.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Cross section
3VX
Effective length (in)
66.926
Outside circumference (in)
67.84
Section
3VX
Strand
10
Thickness
0.37
Top width (in)
4.06
| Application | |
| Category Name Description | The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. |
| Features Advantages | Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. Meets ARPM / RMA IP-3-2 oil and heat-resistant standards. Meets ARPM / RMA IP-3-3 static conductivity requirements. Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves. The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive. Patented Ethylene Material construction provides -60°F to +250°F temperature range to resist belt cracking. |
| Markets/Applications | Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive. |
| Size Range/Availability | Large Inventory of standard lengths and widths are readily available. See sizing table for details. Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. |
| Belt / Sprocket Specifications | |
| Outside Circumference (in) | 67.00 |
| Recommended Sheaves | Super HC Sheaves |
| Notes | |
| Belt Notes | Belt product number is 8 or 9 digits constructed of product series prefix, number of strands, and belt length. For example, 93885080 represents a "3VX" section PowerBand (9388) with 5 strands (5) that is 80.0 inches (080) long. Belt part number is constructed by placing the (#) number of strands required followed by a slash (/) in front of the belt size. For example, 5/3VX800 represents a 3VX800 with 5 joined strands. |
| Packaging | |
| Standard Pack | 1 |
| Weight | |
| Weight (Lbs.) | 4.1 |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read more
#2021828
Brand
Carlisle PT
Model
R3VX670-10
#1984964
Brand
Jason Industrial
Model
10/3VX670
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 177444
Mechanic
Cut the bell when you said I would get a chance to install it seems to fit I still need to test drive
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.