MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Gates 4/5VX630 Super HC Molded Notch PowerBand Belt
- Cross Section: 5VX
- Strands: 4
- Sectional Top Width: 5/8"
- Total Top Width: 2 1/2"
- Depth: 35/64"
- Outside Circumference: 63.00"
- Material ID: 93894063
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 4/5VX630
Contact supplier for technical support on: 303-744-5800
$232.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
cogged
Yes
depth
35/64 in
depth (per rib)
35/64 in
number ribs
4
outside length
63 in
section
5VX
top width
5/8 in
top width (per rib)
5/8 in
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
#2022003
Brand
Carlisle PT
Model
R5VX630-4
#678528
Brand
Bando
Model
4-5VX630
#831763
Brand
TB Woods
Model
4R5VX630
#1986067
Brand
Jason Industrial
Model
4/5VX630
#2243602
Brand
Bestorq
Model
4/5VX630
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.