Image for Illustration purposes only. Actual product may vary
Gates 3/BX65 Tri-Power PowerBand Belt
- Strands: 3
- Cross Section: BX
- Sectional Top Width: 21/32"
- Total Top Width: 1 31/32"
- Depth: 13/32"
- Outside Circumference: 68.6"
- Material ID: 90983065
With a proprietary construction, Gates Tri-Power PowerBand belt has a superior combination of flex and load carrying capacity. This belt is engineered to transmit more horsepower than the classic cross sections in the same amount of drive space.
- Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-Bonded Cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- 15% capacity increase over wrapped belts.
MODEL 3/BX65
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$89.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Angle
38
Cross section
BX
Effective length (in)
67.72
Outside circumference (in)
68.63
Section
BX
Strand
12
Thickness
0.46
Top width (in)
2.15
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration. 15% capacity increase over wrapped belts.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
Perfect Belts for Imperfect Conditions.
Over time, belts fail from heat cracks, stretching, or excessive wear. Belt re-tensioning and replacement leads to downtime, inefficiency, and loss of productivity. Our molded notch V-belts, including the Tri-Power belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail.
Longer Life at Extreme Temperatures.
Ethylene rubber material (EPDM) resists hardening to avoid cracking with 88% broader temperature range compared to other belt materials, with a range from -51°C to +121°C (-60°F to +250°F). Gates Tri-Power PowerBand belts meet ARPM/RMA standards for oil and heat resistance as well as static conductivity.
Brand
TB Woods
Model
3RBX65
Brand
Carlisle PT
Model
RBX65-3
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Brand | Champion |
Model | 06493 |
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.